2021-2026+ Hyundai Elantra CCB Big Brake Kit | Brembo GT6 6-Piston
Official Warranty: 1‑year free replacement for quality defects or coating issues under normal (non-track) use.
We Ship Worldwide
2021-2026+ Hyundai Elantra / N CCB Big Brake Kit — Genuine Brembo GT6 Front + Genuine Brembo GT4 Rear Setup
The 2021-2026+ Hyundai Elantra / N buyer shopping a carbon-ceramic kit is usually trying to control front-axle heat, pad dust, and repeated-stop consistency beyond what the factory iron setup can tolerate. This StopFlex kit uses 380 mm carbon-ceramic rotors with Brembo V6 / GT6 / GTS6 6-piston front caliper options and matching 380 mm rear hardware, giving the car more thermal mass at the rotor face while reducing rotating unsprung weight versus comparable iron discs. Fitment is engineered for the confirmed Elantra or Elantra N trim, not assumed from the CN7 platform name.
- 380 mm front and rear carbon-ceramic rotors require 19 inch or larger wheels; wheels under 19 inch will not clear, and spoke clearance must still be checked against the selected Brembo caliper.
- Front caliper choices are V6, GT6, or GTS6 6-piston Brembo options, each paired with a 380 mm front rotor for this Elantra / N kit.
- Standard Elantra and Elantra N fitment is not treated as interchangeable; brackets and rotor-hat offsets are built for the confirmed trim because performance variants can use different upright, hub, and wheel-clearance geometry.
Fitment Hard Lines
| Field | Specification |
|---|---|
| Vehicle | Hyundai Elantra / N |
| Model years | 2021-2026+ |
| Front setup | Brembo V6 / GT6 / GTS6 6-Piston Caliper Options / 380mm |
| Rear setup | Brembo V4 / GT4 / GTS4 4-Piston Caliper Options / 380mm |
| Page type | Complete CCB kit upgrade |
| Minimum wheel size | 19" (for the 380 mm front rotor) |
Every StopFlex kit is bespoke-engineered for your exact model and trim — the brackets, rotor-hat offsets, and caliper mounting are matched to your specific car, not assumed from the platform. This matters because trims that share a chassis name can differ mechanically: a pure M or performance variant often carries different front knuckles/uprights, hub geometry, and wheel axial (ET) clearance than the standard models in the same family, so a bracket and hat offset that bolt onto one are not the same parts that fit the other. StopFlex supplies the calipers, pads, rotor hats, floating hardware, and brake lines as a matched system built to your confirmed trim. Cars with modified knuckles, modified uprights, or non-factory suspension mounting points must be reviewed before ordering and are not treated as direct-fit.
This setup uses a 380 mm front rotor, so the minimum wheel size is 19". Wheels under 19" will not clear the caliper and rotor, and spoke profile and offset affect clearance too — confirm your exact wheels before ordering.
| Wheel Size (Standard) | Disc Range |
|---|---|
| 15" | 260 mm – 285 mm |
| 16" | 285 mm – 300 mm |
| 17" | 300 mm – 330 mm |
| 18" | 330 mm – 355 mm |
| 19" | 355 mm – 380 mm |
| 20" | 380 mm – 400 mm |
| 21" | 400 mm – 420 mm |
| 22" | 420 mm – 440 mm |
Caliper Overview — Front & Rear Balance
Front Caliper (Primary Upgrade)
The front axle uses Brembo V6 / GT6 / GTS6 6-Piston Caliper Options to spread clamping load across a larger pad area and give the pedal a firmer, more repeatable response under heat. The buyer chooses V6 = Genuine Brembo OEM Cadillac CTS-V 6-Piston Caliper with 380 mm rotor, GT6 = Genuine Brembo GT | M6 6-Piston Caliper with 380 mm rotor, or GTS6 = Genuine Brembo GT | S6 6-Piston Caliper with 380 mm rotor. Each option is a genuine Brembo-based aluminum performance caliper matched to StopFlex carbon-ceramic rotors, pads, hats, hardware, and lines for the confirmed Elantra / N trim.
Rear Caliper (Balance)
The rear axle uses Brembo V4 / GT4 / GTS4 4-Piston Caliper Options with 380 mm rotors to keep rear torque contribution and braking stability matched to the larger front package. EPB handling depends on the customer's exact Elantra trim because some CN7 trims use electronic parking brake hardware while Elantra N listings commonly show a manual lever parking brake.
Front & rear, engineered together: This kit is engineered as a front-and-rear system so rotor diameter, caliper piston layout, pad selection, and rear contribution are considered together. That matters on the Elantra / N because a front-only torque increase can change pedal travel, ABS behavior, and brake balance if the rear axle is not matched correctly.
Make It Yours — Color & Logo Customization
Every StopFlex kit-upgrade order can be finished with custom caliper colors, a custom caliper logo, and custom rotor hat colors, so the brake package matches your exact build instead of a fixed off-the-shelf look.
- Custom caliper color
- Custom caliper logo
- Custom rotor hat color
Why StopFlex CCB
Lower Unsprung Mass
StopFlex carbon-ceramic rotors are engineered to reduce rotor mass versus comparable iron discs, helping the suspension react cleaner and the steering feel more precise.
High-Temperature Stability
The carbon-silicon-carbide matrix is built for stable braking behavior at temperatures that can push iron rotors into heavy fade.
Rust-Free Rotor Surface
Carbon ceramic does not form orange flash rust after rain, washing, or storage, keeping the visible rotor face cleaner behind open wheels.
Long Street-Service Potential
In normal road use with matched pads and proper bedding, StopFlex CCB rotors are designed for far longer service life than typical iron replacement rotors.
Low Visible Dust
When paired with matched StopFlex pads, the system produces very low visible brake dust compared with conventional iron rotor and pad combinations.
Premium Ceramic-Glaze Appearance
StopFlex's proprietary coating creates a bright, high-end ceramic-glaze finish with subtle glaze texture and a more premium visual character behind open wheels.
Street-Usable Cold Bite
Street Spec and Track-Day Spec rotors are designed for normal first-stop road use, including cold-weather operation. Motorsport Spec is the competition-focused exception.
Continuous Fiber Reinforcement
Long-fiber carbon ceramic construction improves structural strength and thermal durability versus chopped-fiber approaches.
Heat Management Note
Carbon ceramic rotors tolerate extreme surface temperature, but they do not remove every heat-management requirement. During repeated hard stops, heat can still soak into pads, fluid, seals, calipers, wheels, and nearby components. For long track sessions, mountain descents, or sustained aggressive driving, brake cooling and high-temperature fluid are still recommended.
Street / Track-Day / Motorsport Rotor Options
Street Spec
Ceramic coating, cross-drilled face, and large cooling channels.
Best for daily driving and premium street builds that need clean cold bite, low dust, corrosion-free appearance, and long service life.
Track-Day Spec
Ceramic coating, blank face, and honeycomb cooling channels.
Best for fast-road and track-day use where repeated braking stability matters more than maximum visual drilling style.
Motorsport Spec
Uncoated blank face with honeycomb cooling channels.
Best for race-focused builds that run competition pads, high-temperature fluid, cooling strategy, and a proper warm-up window. Not the default street choice.
Package Scope
| Item | Details |
|---|---|
| Front calipers | Brembo V6 / GT6 / GTS6 6-Piston Caliper Options |
| Front CCB rotors | 380mm |
| Rear calipers | Brembo V4 / GT4 / GTS4 4-Piston Caliper Options |
| Rear CCB rotors | 380mm |
| CCB brake pads | Matched for the supplied StopFlex carbon ceramic rotors |
| Rotor hats and floating hardware | Vehicle-specific hardware package |
| Brake lines | Included for complete kit-upgrade orders |
| Color customization | Custom caliper colors, a custom caliper logo, and custom rotor hat colors are available for every kit-upgrade order. |
| Order scope | Default listing is full-car set when front and rear are specified. Front-only or rear-only orders can be arranged after confirmation. |
| Front caliper option mapping | V6 = Genuine Brembo OEM Cadillac CTS-V 6-Piston Caliper — 380 mm rotor GT6 = Genuine Brembo GT | M6 6-Piston Caliper — 380 mm rotor GTS6 = Genuine Brembo GT | S6 6-Piston Caliper — 380 mm rotor |
| Rear caliper option mapping | V4 = Genuine Brembo OEM Cadillac CTS-V 4-Piston Caliper — 380 mm rotor GT4 = Genuine Brembo GT | M4 4-Piston Caliper — 380 mm rotor GTS4 = Genuine Brembo GT | S4 4-Piston Caliper — 380 mm rotor |
EPB & Rear Caliper Options
This vehicle leaves the factory with an electronic parking brake (EPB) built into the rear brake, so the rear of the kit is built to keep that EPB working. There are two rear paths. The first is a dual-caliper rear: a main performance caliper handles braking while a dedicated EPB actuator caliper is retained alongside it, so the electronic parking brake, auto-hold, and hill-start assist all keep working; on this path the rear performance caliper can be the TTSPORT EP4 / EP4S 4-piston caliper. The second is an EPB-integrated caliper, a single rear caliper with the electromechanical parking-brake motor built in for a cleaner install with fewer parts behind the wheel; on this path the rear is the TTSPORT EP4 / EP4S 4-piston caliper with integrated EPB. Which path fits best depends on your exact trim and EPB configuration, your budget, your appearance preference, and your wheel size and spoke clearance. Confirm your car's rear-brake configuration with StopFlex before ordering so the correct EPB-compatible rear option is built for your kit.
| Rear option | What it is | Rear caliper | Best when |
|---|---|---|---|
| Dual caliper (EPB retained) | Performance caliper plus a dedicated EPB actuator caliper, both fitted on the rear, so the factory electronic parking brake keeps working. | TTSPORT EP4 / EP4S 4-Piston Caliper | You want guaranteed factory EPB, auto-hold, and hill-start behavior preserved. |
| EPB-integrated caliper | A single rear caliper with the electromechanical parking-brake motor built in, for a cleaner install with fewer parts behind the wheel. | TTSPORT EP4 / EP4S 4-Piston Caliper with integrated EPB | You want a cleaner single-caliper rear with full EPB function. |
FAQ
Will this 380 mm kit fit my exact 2021-2026+ Elantra or Elantra N?
Fitment is confirmed against your exact model, trim, VIN details, wheel diameter, wheel offset, and spoke profile before production. StopFlex does not treat standard Elantra and Elantra N as a universal CN7 bolt-on because knuckle, hub, brake, and wheel-clearance geometry can differ by trim.
What wheels do I need for the 380 mm front and rear rotors?
The 380 mm rotor package requires 19 inch or larger wheels. A 19 inch barrel is the minimum, but spoke clearance still has to be checked against the chosen Brembo V6, GT6, or GTS6 front caliper and the rear 4-piston option.
Will the electronic parking brake still work?
If your Elantra trim has a factory EPB, the rear solution must be engineered around that exact EPB configuration. If your Elantra N uses the manual lever parking brake, the rear package is built around that cable/lever arrangement instead; the order review confirms which system is on the car.
Why change from the factory iron brakes to carbon-ceramic on this car?
Carbon-ceramic rotors reduce brake dust and rotating unsprung weight while handling repeated high-temperature stops better than typical iron street hardware. On an Elantra N used for canyon driving, track days, or repeated highway braking, the 380 mm StopFlex rotors and Brembo 6-piston front calipers add heat capacity and pad support without assuming a generic platform fit.
Need Fitment Confirmation?
Send the exact vehicle details, current rotor sizes, and caliper type before ordering.
More Contact Information
We’re here to help! Whether you need expert advice on brake setups, have questions about your order, or just want to share feedback, our team is ready to assist you. Reach out via your preferred channel below, or use the inquiry form.
Get in Touch
Business Hours
Monday – Saturday, 9:30 AM – 6:30 PM (GMT +8)
Current Time:
Follow Us
- Choosing a selection results in a full page refresh.