BMW 530i / 540i / 550e / M5 (G60/G61/G90/G99) Brembo GT6 6-Piston Caliper with 380mm CCB carbon ceramic brake rotor
Brembo GT6 6-Piston Caliper 380mm CCB carbon ceramic front brake kit for BMW 530i / 540i / 550e / M5 (G60/G61/G90/G99)
BMW 530i / 540i / 550e / M5 (G60/G61/G90/G99) Brembo GT4 4-Piston Caliper with 355mm CCB carbon ceramic rear brake rotor
Brembo GT4 4-Piston Caliper 355mm CCB carbon ceramic rear brake kit for BMW 530i / 540i / 550e / M5 (G60/G61/G90/G99)

2024-2026+ BMW 5 Series / M5 (G60/G61/G90/G99) Carbon Ceramic Big Brake Kit — Brembo GT6 6-Piston

Request a Custom Quote

To ensure 100% fitment accuracy, our brake kits are custom-configured for your specific vehicle. Please share your Year / Make / Model / Wheel Size / VIN with our specialists for a bespoke setup and pricing.

Official Warranty: 1‑year free replacement for quality defects or coating issues under normal (non-track) use.

We Ship Worldwide

StopFlex worldwide shipping carriers including DHL, FedEx, UPS, DPD, GLS, and SF Express.
About the Disc

Will This Fit My Car?

Full Upgrade CCB Big Brake Kits (With Calipers) for the 2024-2026+ BMW 5 Series / M5 (G60/G61/G90/G99). This page's exact brake setup:

Model Years Front Setup Rear Setup Min. Wheel Size
2024-2026+ Option 1: Brembo OEM Cadillac CTS-V 6-Piston Caliper — 380 mm rotor
Option 2: Brembo GT | M6 6-Piston Caliper — 380 mm rotor
Option 3: Brembo GT | S6 6-Piston Caliper — 380 mm rotor
Option 1: Brembo OEM Cadillac CTS-V 4-Piston Caliper — 355 mm rotor
Option 2: Brembo GT | M4 4-Piston Caliper — 355 mm rotor
Option 3: Brembo GT | S4 4-Piston Caliper — 355 mm rotor
19"

This kit is built per car, not per platform. We engineer the brackets, rotor-hat offsets, and caliper mounting to your confirmed model and trim, because trims sharing a chassis name frequently differ underneath — performance variants can run different knuckles, hub geometry, and wheel ET clearance than their standard siblings. You receive calipers, pads, rotor hats, floating hardware, and brake lines as one matched, trim-specific system. Cars with modified knuckles, uprights, or non-factory suspension mounting points need review before ordering.

The 380 mm rotor sets the minimum wheel size at 19" — smaller wheels will not clear the caliper and rotor. Spoke profile and offset also affect clearance; confirm your exact wheels before ordering.

Wheel Size (Standard) Disc Range
15" 260 mm – 285 mm
16" 285 mm – 300 mm
17" 300 mm – 330 mm
18" 330 mm – 355 mm
19" 355 mm – 380 mm
20" 380 mm – 400 mm
21" 400 mm – 420 mm
22" 420 mm – 440 mm

What's in the Box

Item Details
Product type Full Upgrade CCB Big Brake Kits (With Calipers)
Front calipers Option 1: Brembo OEM Cadillac CTS-V 6-Piston Caliper — 380 mm rotor
OE / Part No.: L 172-2521 · R 172-2522
Option 2: Brembo GT | M6 6-Piston Caliper — 380 mm rotor
Option 3: Brembo GT | S6 6-Piston Caliper — 380 mm rotor
Rear calipers Option 1: Brembo OEM Cadillac CTS-V 4-Piston Caliper — 355 mm rotor
OE / Part No.: L 172-2523 · R 172-2524
Option 2: Brembo GT | M4 4-Piston Caliper — 355 mm rotor
Option 3: Brembo GT | S4 4-Piston Caliper — 355 mm rotor
CCB brake pads Matched ceramic-compatible compound for the supplied StopFlex carbon ceramic rotors
Rotor hats and floating hardware Vehicle-specific hardware package
Brake lines Included for complete kit-upgrade orders
Order scope Default listing is full-car set when front and rear are specified. Front-only or rear-only orders can be arranged after confirmation.

Make It Yours — Color & Logo Customization

Specify custom caliper colors, a custom caliper logo, and custom rotor hat colors on any kit order — the finished package matches your build instead of a standard catalog look.

  • Custom caliper color
  • Custom caliper logo
  • Custom rotor hat color

Why Carbon Ceramic — and Why StopFlex

Premium Ceramic-Glaze Finish

StopFlex's proprietary coating gives the disc a bright ceramic-glaze surface with subtle texture — the factory carbon-ceramic look, clearly visible through open wheel designs.

Continuous Fiber Construction

StopFlex discs are built with long continuous carbon fiber instead of chopped short fiber. Continuous strands carry load across the whole rotor body, raising strength and thermal durability under heat cycles.

Bespoke Per-Vehicle Engineering

Every order is machined to the confirmed vehicle and trim. Brackets, hat offsets, and pad shapes are built for that exact car — never pulled from a one-size-fits-all catalog.

CCB-Specific Pad Compound

A low-metallic resin pad compound reinforced with steel, copper, and aramid fiber, made for ceramic discs: stable to about 750 °C, roughly 0.44 average friction, strong fade resistance, low rotor wear.

Lower Unsprung Mass

A carbon-ceramic rotor weighs roughly half of the equivalent iron disc. Less rotating, unsprung mass lets the suspension follow broken pavement more cleanly and makes steering response noticeably sharper.

High-Temperature Stability

The carbon-silicon-carbide friction matrix keeps working at temperatures that push iron rotors into heavy fade, so the tenth hard stop feels like the first — same pedal travel, same bite point.

Rust-Free Rotor Surface

Ceramic discs cannot flash-rust. After rain, a wash, or weeks of parking, the rotor face behind your open-spoke wheels stays clean — no orange ring on a freshly detailed car.

Long Street-Service Life

In normal road use with matched pads and correct bedding, one StopFlex CCB rotor set is engineered to outlast several sets of iron replacement rotors, recovering part of the up-front cost.

Low Visible Dust

Matched with StopFlex pads, the system sheds a fraction of the dust an iron rotor and pad combination throws. Wheels stay clean for weeks of driving instead of days.

Winter & Cold-Weather Braking

Winter question, straight answer: untuned ceramic discs bite less when cold. StopFlex optimized the pad compound and the rotor's ceramic coating for cold operation, so cold-start braking in winter feels very close to warm-weather braking. Extra following distance on freezing first stops is still smart; severe-winter daily cars should run Street Spec.

Caliper Overview

Front Caliper

The front uses the Brembo V6 / GT6 / GTS6 6-piston caliper family over a 380 mm carbon-ceramic rotor; you pick among the V6 (OEM Cadillac CTS-V), GT6 (Brembo GT | M6), or GTS6 (Brembo GT | S6). All three give you six pistons of even, repeatable clamp for a firm, consistent pedal on the heavy G60/G90 platform.

Rear Caliper

The rear pairs a Brembo V4 / GT4 / GTS4 4-piston caliper with a 355 mm carbon-ceramic rotor, choosing between the V4 (OEM Cadillac CTS-V), GT4 (Brembo GT | M4), or GTS4 (Brembo GT | S4). The four-piston rear adds real thermal capacity for a car this heavy and is engineered to retain the factory electronic parking brake function.

Choose Your Rotor: Street, Track-Day, or Motorsport

StopFlex Street Spec carbon ceramic brake rotor

Street Spec

Ceramic coating, cross-drilled face, and large cooling channels.

Best for daily driving and premium street builds that need clean cold bite, low dust, corrosion-free appearance, and long service life.

StopFlex Track-Day Spec carbon ceramic brake rotor

Track-Day Spec

Ceramic coating, blank face, and honeycomb cooling channels.

Best for fast-road and track-day use where repeated braking stability matters more than maximum visual drilling style.

StopFlex Motorsport Spec carbon ceramic brake rotor

Motorsport Spec

Uncoated blank face with honeycomb cooling channels.

Best for race-focused builds that run competition pads, high-temperature fluid, cooling strategy, and a proper warm-up window. Not the default street choice.

Heat Management Note

Carbon ceramic rotors tolerate extreme surface temperature, but they do not remove every heat-management requirement. During repeated hard stops, heat still soaks into pads, fluid, seals, calipers, wheels, and nearby components. For long track sessions, mountain descents, or sustained aggressive driving, brake cooling and high-temperature fluid are still recommended.

Get Your Fitment Confirmed

Send the exact vehicle details, current rotor sizes, and caliper type before ordering. Every StopFlex order is confirmed against your VIN-level configuration before production.

FAQ

Will this kit fit my exact 5 Series or M5 trim?

Each kit is engineered for your confirmed trim, not the G60/G61/G90/G99 platform in general. The G90/G99 M5 uses different front knuckles, hub geometry, and wheel clearance than a 540i xDrive, so the brackets, rotor-hat offsets, and caliper mounting are cut to match the car you actually own. Confirm your trim and we build to it — we don't sell this as a blanket platform bolt-on.

What wheels do I need to clear these brakes?

The front rotor is 380 mm, so you need a minimum 19-inch wheel; nothing under 19 inches will clear the caliper and disc. Spoke design matters too — some 19-inch wheels have inner spoke profiles that foul the caliper — so send us your wheel details and we'll verify clearance before you buy.

How do carbon-ceramic brakes behave in winter and on cold mornings?

An untuned cold carbon-ceramic disc bites less than cold iron — that's physics, not a fault. We've optimized both the pad compound and the disc's ceramic coating for cold starts, so first-stop feel on a cold G60 or M5 now comes very close to warm summer feel. On the coldest first stops it's still smart to leave a little extra following distance until everything is up to temperature.

Do these keep my electronic parking brake working?

Yes. The G60/G61/G90/G99 uses a factory electromechanical parking brake in the rear, and the Brembo V4 / GT4 / GTS4 rear caliper is set up to retain that EPB actuation. Your parking brake, auto-hold, and dash function stay intact after the swap.

Request a Quote / Inquiry

* We respect your privacy. Your details are 100% secure and never shared.

* For WhatsApp messaging only. We never call or text.

More Contact Information

We’re here to help! Whether you need expert advice on brake setups, have questions about your order, or just want to share feedback, our team is ready to assist you. Reach out via your preferred channel below, or use the inquiry form.

Get in Touch

WhatsApp

Messenger

sales@stopflex-ccb.com

Business Hours

Monday – Saturday, 9:30 AM – 6:30 PM (GMT +8)

Current Time:

Follow Us