2025-2026+ BMW 2 Series (F74/F78) CCB Big Brake Kit | Brembo GT6 6-Piston
Official Warranty: 1‑year free replacement for quality defects or coating issues under normal (non-track) use.
We Ship Worldwide
2025-2026+ BMW 2 Series (F74/F78) CCB Big Brake Kit — Genuine Brembo GT6 Front + Genuine Brembo GT4 Rear Setup
The 2025-2026+ BMW 2 Series F74/F78 owner shopping this kit is usually trying to reduce iron-rotor heat fade, brake dust, and front-end rotating mass without guessing at fitment on a new chassis. This StopFlex Kit Upgrade pairs 380 mm front carbon-ceramic rotors with Brembo V6 / GT6 / GTS6 6-piston caliper options and 355 mm rear carbon-ceramic rotors with Brembo V4 / GT4 / GTS4 4-piston options. Each kit is built around the buyer’s confirmed trim, wheel package, hub geometry, and brake electronics instead of assuming every F74/F78 shares the same offsets and clearances.
- 380 mm front carbon-ceramic rotors require 19-inch or larger wheels on the F74/F78; spoke clearance is verified separately because barrel diameter alone does not confirm caliper clearance.
- Front choices are V6, GT6, or GTS6 6-piston Brembo calipers on the same 380 mm rotor, giving the buyer a Brembo OEM-derived or GT-family caliper path without changing the required wheel envelope.
- Rear 355 mm carbon-ceramic rotors are matched to Brembo V4, GT4, or GTS4 4-piston caliper options so rear brake torque and stability are engineered with the front upgrade, not added as an afterthought.
Fitment Hard Lines
| Field | Specification |
|---|---|
| Vehicle | BMW 2 Series (F74/F78) |
| Model years | 2025-2026+ |
| Front setup | Brembo V6 / GT6 / GTS6 6-Piston Caliper Options / 380mm |
| Rear setup | Brembo V4 / GT4 / GTS4 4-Piston Caliper Options / 355mm |
| Page type | Complete CCB kit upgrade |
| Minimum wheel size | 19" (for the 380 mm front rotor) |
Every StopFlex kit is bespoke-engineered for your exact model and trim — the brackets, rotor-hat offsets, and caliper mounting are matched to your specific car, not assumed from the platform. This matters because trims that share a chassis name can differ mechanically: a pure M or performance variant often carries different front knuckles/uprights, hub geometry, and wheel axial (ET) clearance than the standard models in the same family, so a bracket and hat offset that bolt onto one are not the same parts that fit the other. StopFlex supplies the calipers, pads, rotor hats, floating hardware, and brake lines as a matched system built to your confirmed trim. Cars with modified knuckles, modified uprights, or non-factory suspension mounting points must be reviewed before ordering and are not treated as direct-fit.
This setup uses a 380 mm front rotor, so the minimum wheel size is 19". Wheels under 19" will not clear the caliper and rotor, and spoke profile and offset affect clearance too — confirm your exact wheels before ordering.
| Wheel Size (Standard) | Disc Range |
|---|---|
| 15" | 260 mm – 285 mm |
| 16" | 285 mm – 300 mm |
| 17" | 300 mm – 330 mm |
| 18" | 330 mm – 355 mm |
| 19" | 355 mm – 380 mm |
| 20" | 380 mm – 400 mm |
| 21" | 400 mm – 420 mm |
| 22" | 420 mm – 440 mm |
Caliper Overview — Front & Rear Balance
Front Caliper (Primary Upgrade)
The front axle uses Brembo V6 / GT6 / GTS6 6-Piston Caliper Options, chosen by the buyer: V6 = Genuine Brembo OEM Cadillac CTS-V 6-Piston Caliper — 380 mm rotor; GT6 = Genuine Brembo GT | M6 6-Piston Caliper — 380 mm rotor; GTS6 = Genuine Brembo GT | S6 6-Piston Caliper — 380 mm rotor. The 6-piston layout spreads clamp load across the pad for stable pedal response and more even pressure on the 380 mm carbon-ceramic rotor. These are genuine Brembo caliper paths, using proven fixed-caliper architecture rather than a cosmetic bracket-and-cover conversion.
Rear Caliper (Balance)
The rear axle uses Brembo V4 / GT4 / GTS4 4-Piston Caliper Options on 355 mm carbon-ceramic rotors: V4 = Genuine Brembo OEM Cadillac CTS-V 4-Piston Caliper; GT4 = Genuine Brembo GT | M4 4-Piston Caliper; GTS4 = Genuine Brembo GT | S4 4-Piston Caliper. The rear package is sized to support brake balance and stability under hard stops, with EPB compatibility handled during the trim-specific engineering review.
Front & rear, engineered together: A 380 mm 6-piston front upgrade changes front brake torque and thermal capacity, so the 355 mm rear 4-piston package is engineered with it to preserve predictable brake bias. StopFlex matches caliper mounting, rotor-hat offset, pad selection, and line routing as a system for the confirmed F74/F78 trim instead of pairing a large front kit with an unverified rear setup.
Make It Yours — Color & Logo Customization
Every StopFlex kit-upgrade order can be finished with custom caliper colors, a custom caliper logo, and custom rotor hat colors, so the brake package matches your exact build instead of a fixed off-the-shelf look.
- Custom caliper color
- Custom caliper logo
- Custom rotor hat color
Why StopFlex CCB
Lower Unsprung Mass
StopFlex carbon-ceramic rotors are engineered to reduce rotor mass versus comparable iron discs, helping the suspension react cleaner and the steering feel more precise.
High-Temperature Stability
The carbon-silicon-carbide matrix is built for stable braking behavior at temperatures that can push iron rotors into heavy fade.
Rust-Free Rotor Surface
Carbon ceramic does not form orange flash rust after rain, washing, or storage, keeping the visible rotor face cleaner behind open wheels.
Long Street-Service Potential
In normal road use with matched pads and proper bedding, StopFlex CCB rotors are designed for far longer service life than typical iron replacement rotors.
Low Visible Dust
When paired with matched StopFlex pads, the system produces very low visible brake dust compared with conventional iron rotor and pad combinations.
Premium Ceramic-Glaze Appearance
StopFlex's proprietary coating creates a bright, high-end ceramic-glaze finish with subtle glaze texture and a more premium visual character behind open wheels.
Street-Usable Cold Bite
Street Spec and Track-Day Spec rotors are designed for normal first-stop road use, including cold-weather operation. Motorsport Spec is the competition-focused exception.
Continuous Fiber Reinforcement
Long-fiber carbon ceramic construction improves structural strength and thermal durability versus chopped-fiber approaches.
Heat Management Note
Carbon ceramic rotors tolerate extreme surface temperature, but they do not remove every heat-management requirement. During repeated hard stops, heat can still soak into pads, fluid, seals, calipers, wheels, and nearby components. For long track sessions, mountain descents, or sustained aggressive driving, brake cooling and high-temperature fluid are still recommended.
Street / Track-Day / Motorsport Rotor Options
Street Spec
Ceramic coating, cross-drilled face, and large cooling channels.
Best for daily driving and premium street builds that need clean cold bite, low dust, corrosion-free appearance, and long service life.
Track-Day Spec
Ceramic coating, blank face, and honeycomb cooling channels.
Best for fast-road and track-day use where repeated braking stability matters more than maximum visual drilling style.
Motorsport Spec
Uncoated blank face with honeycomb cooling channels.
Best for race-focused builds that run competition pads, high-temperature fluid, cooling strategy, and a proper warm-up window. Not the default street choice.
Package Scope
| Item | Details |
|---|---|
| Front calipers | Brembo V6 / GT6 / GTS6 6-Piston Caliper Options |
| Front CCB rotors | 380mm |
| Rear calipers | Brembo V4 / GT4 / GTS4 4-Piston Caliper Options |
| Rear CCB rotors | 355mm |
| CCB brake pads | Matched for the supplied StopFlex carbon ceramic rotors |
| Rotor hats and floating hardware | Vehicle-specific hardware package |
| Brake lines | Included for complete kit-upgrade orders |
| Color customization | Custom caliper colors, a custom caliper logo, and custom rotor hat colors are available for every kit-upgrade order. |
| Order scope | Default listing is full-car set when front and rear are specified. Front-only or rear-only orders can be arranged after confirmation. |
| Front caliper option mapping | V6 = Genuine Brembo OEM Cadillac CTS-V 6-Piston Caliper — 380 mm rotor GT6 = Genuine Brembo GT | M6 6-Piston Caliper — 380 mm rotor GTS6 = Genuine Brembo GT | S6 6-Piston Caliper — 380 mm rotor |
| Rear caliper option mapping | V4 = Genuine Brembo OEM Cadillac CTS-V 4-Piston Caliper — 355 mm rotor GT4 = Genuine Brembo GT | M4 4-Piston Caliper — 355 mm rotor GTS4 = Genuine Brembo GT | S4 4-Piston Caliper — 355 mm rotor |
EPB & Rear Caliper Options
This vehicle leaves the factory with an electronic parking brake (EPB) built into the rear brake, so the rear of the kit is built to keep that EPB working. There are two rear paths. The first is a dual-caliper rear: a main performance caliper handles braking while a dedicated EPB actuator caliper is retained alongside it, so the electronic parking brake, auto-hold, and hill-start assist all keep working; on this path the rear performance caliper can be the TTSPORT EP4 / EP4S 4-piston caliper. The second is an EPB-integrated caliper, a single rear caliper with the electromechanical parking-brake motor built in for a cleaner install with fewer parts behind the wheel; on this path the rear is the TTSPORT EP4 / EP4S 4-piston caliper with integrated EPB. Which path fits best depends on your exact trim and EPB configuration, your budget, your appearance preference, and your wheel size and spoke clearance. Confirm your car's rear-brake configuration with StopFlex before ordering so the correct EPB-compatible rear option is built for your kit.
| Rear option | What it is | Rear caliper | Best when |
|---|---|---|---|
| Dual caliper (EPB retained) | Performance caliper plus a dedicated EPB actuator caliper, both fitted on the rear, so the factory electronic parking brake keeps working. | TTSPORT EP4 / EP4S 4-Piston Caliper | You want guaranteed factory EPB, auto-hold, and hill-start behavior preserved. |
| EPB-integrated caliper | A single rear caliper with the electromechanical parking-brake motor built in, for a cleaner install with fewer parts behind the wheel. | TTSPORT EP4 / EP4S 4-Piston Caliper with integrated EPB | You want a cleaner single-caliper rear with full EPB function. |
FAQ
Will this fit my exact 2025-2026+ BMW 2 Series F74/F78 trim?
Fitment is confirmed per car, not assumed from the F74/F78 chassis name. StopFlex checks the exact model, trim, hub geometry, front knuckle/upright, rear brake configuration, and wheel data before building the brackets, rotor hats, lines, and caliper mounts.
What wheel size is required for the 380 mm front rotor?
The 380 mm front carbon-ceramic rotor requires 19-inch or larger wheels. Wheel diameter is only the first check; spoke shape, barrel profile, offset, and spacer use also determine whether the Brembo V6 / GT6 / GTS6 6-piston caliper clears.
Will the electronic parking brake still work?
The F74/F78 2 Series uses an electronic parking brake, so rear fitment is reviewed around EPB function before the kit is built. StopFlex confirms the rear caliper option, parking-brake interface, and trim-specific rear hardware instead of treating the rear as a universal 355 mm conversion.
Why choose carbon-ceramic over an iron big brake kit on this car?
Carbon-ceramic rotors reduce brake dust and rotating mass compared with iron rotors, while the 380 mm front and 355 mm rear sizing adds heat capacity for repeated high-speed stops. The payoff for a compact BMW 2 Series is cleaner open wheels, better thermal consistency, and less front-end mass than an equivalent iron rotor package.
Need Fitment Confirmation?
Send the exact vehicle details, current rotor sizes, and caliper type before ordering.
More Contact Information
We’re here to help! Whether you need expert advice on brake setups, have questions about your order, or just want to share feedback, our team is ready to assist you. Reach out via your preferred channel below, or use the inquiry form.
Get in Touch
Business Hours
Monday – Saturday, 9:30 AM – 6:30 PM (GMT +8)
Current Time:
Follow Us
- Choosing a selection results in a full page refresh.