2015-2024 Porsche Macan (95B) / T / S Carbon Ceramic Brake Kit
Official Warranty: 1‑year free replacement for quality defects or coating issues under normal (non-track) use.
2015-2024 Porsche Macan (95B) / T / S Carbon Ceramic Brake Kit — OEM-Size Replacement
The 2015-2024 Porsche Macan 95B / T / S is heavy enough to overwork its OEM iron brakes in repeated mountain or track-day stops, and the open-wheel layouts make pad dust obvious. This StopFlex OEM-size replacement kit matches the listed Macan front rotor references—345mm or 350mm for Base/T, 350mm or 360mm for S—and the 330mm rear setup, replacing the rotors, pads, hats, and floating hardware as a complete carbon-ceramic system. The result is higher thermal stability than iron, less brake dust, and lower rotating unsprung mass while retaining the factory pad-wear warning behavior with no dashboard errors.
- Built only for 2015-2024 Macan 95B / T / S fitments using the listed 345mm, 350mm, or 360mm front rotor references and 330mm rear rotors.
- Carbon-ceramic rotors reduce the heat checking, vibration, and dust concerns that drive many Macan owners away from repeated OEM iron rotor replacements.
- Included pads support the Macan factory brake pad wear-sensor circuit, so the Porsche pad-wear warning remains functional instead of being bypassed.
Fitment Hard Lines
| Field | Specification |
|---|---|
| Vehicle | Porsche Macan (95B) / T / S |
| Model years | 2015-2024 |
| Front rotor reference | Base/T: 345mm or 350mm; S: 350mm or 360mm |
| Rear rotor reference | Base/T/S: 330mm |
| Page type | OEM-size carbon ceramic replacement |
| Minimum wheel size | 18" (for the 345 mm rotor) |
For OEM replacement orders, StopFlex builds around the factory rotor specification shown for this vehicle. Front floating-caliper setups require manual review before production. If the car uses aftermarket calipers such as Brembo, AP Racing, Alcon, or Wilwood, the order can still be built, but the exact caliper model, pad shape, and rotor dimensions must be confirmed before production.
This setup uses a 345 mm rotor, so the minimum wheel size is 18". Wheels under 18" will not clear the caliper and rotor, and spoke profile and offset affect clearance too — confirm your exact wheels before ordering.
Why StopFlex CCB
Lower Unsprung Mass
StopFlex carbon-ceramic rotors are engineered to reduce rotor mass versus comparable iron discs, helping the suspension react cleaner and the steering feel more precise.
High-Temperature Stability
The carbon-silicon-carbide matrix is built for stable braking behavior at temperatures that can push iron rotors into heavy fade.
Rust-Free Rotor Surface
Carbon ceramic does not form orange flash rust after rain, washing, or storage, keeping the visible rotor face cleaner behind open wheels.
Long Street-Service Potential
In normal road use with matched pads and proper bedding, StopFlex CCB rotors are designed for far longer service life than typical iron replacement rotors.
Low Visible Dust
When paired with matched StopFlex pads, the system produces very low visible brake dust compared with conventional iron rotor and pad combinations.
Premium Ceramic-Glaze Appearance
StopFlex's proprietary coating creates a bright, high-end ceramic-glaze finish with subtle glaze texture and a more premium visual character behind open wheels.
Street-Usable Cold Bite
Street Spec and Track-Day Spec rotors are designed for normal first-stop road use, including cold-weather operation. Motorsport Spec is the competition-focused exception.
Continuous Fiber Reinforcement
Long-fiber carbon ceramic construction improves structural strength and thermal durability versus chopped-fiber approaches.
Custom Rotor Hat Color
Every StopFlex OEM replacement order can be built with a custom rotor hat color, giving the carbon ceramic rotor package a cleaner match with the wheel, body color, and overall build style.
Heat Management Note
Carbon ceramic rotors tolerate extreme surface temperature, but they do not remove every heat-management requirement. During repeated hard stops, heat can still soak into pads, fluid, seals, calipers, wheels, and nearby components. For long track sessions, mountain descents, or sustained aggressive driving, brake cooling and high-temperature fluid are still recommended.
Street / Track-Day / Motorsport Rotor Options
Street Spec
Ceramic coating, cross-drilled face, and large cooling channels.
Best for daily driving and premium street builds that need clean cold bite, low dust, corrosion-free appearance, and long service life.
Track-Day Spec
Ceramic coating, blank face, and honeycomb cooling channels.
Best for fast-road and track-day use where repeated braking stability matters more than maximum visual drilling style.
Motorsport Spec
Uncoated blank face with honeycomb cooling channels.
Best for race-focused builds that run competition pads, high-temperature fluid, cooling strategy, and a proper warm-up window. Not the default street choice.
Package Scope
| Item | Details |
|---|---|
| CCB rotors | Full-car set by default |
| CCB brake pads | Matched for StopFlex carbon ceramic rotors |
| Brake pad wear sensors | Included; 100% compatible with the OEM wear-sensor system. |
| 7075 aluminum floating rotor hats | Vehicle-specific fitment |
| Stainless floating hardware | Full-car hardware set |
| Rotor hat color | Custom rotor hat colors are available for every OEM replacement order. |
| Order scope | Default listing is full-car set. Front-only or rear-only orders can be arranged after confirmation. |
FAQ
Will this kit fit my 2015-2024 Macan Base, T, or S?
It fits only the exact 95B Macan / T / S brake configurations listed for this page: Base/T front rotor reference 345mm or 350mm, S front rotor reference 350mm or 360mm, and 330mm rear rotors. Confirm the rotor diameter on your car before ordering because Porsche used multiple Macan brake packages.
Will the electronic parking brake, auto-hold, and pad-wear warning still work?
This is an OEM-size replacement for the listed Macan rear 330mm brake setup and does not require deleting the electronic parking brake function. The included pad setup is 100% compatible with the Porsche OEM wear-sensor system, so the factory pad-wear warning keeps working without dashboard errors.
Why replace Macan iron rotors with carbon-ceramic rotors?
Carbon-ceramic rotors handle repeated heat cycles with less fade than iron, generate far less visible dust on Macan wheels, and remove rotating unsprung weight from the brake corners. The kit is aimed at owners who want the same OEM-size packaging with improved heat stability and cleaner wheels.
What should I verify before placing the order?
Verify your model year, trim, front rotor diameter, rear 330mm rotor fitment, and wheel clearance. Do not order this page for a Macan GTS, Turbo, PCCB, PSCB, or any brake package outside the Base/T/S rotor sizes listed here.
Need Fitment Confirmation?
Send the exact vehicle details, current rotor sizes, and caliper type before ordering.
More Contact Information
We’re here to help! Whether you need expert advice on brake setups, have questions about your order, or just want to share feedback, our team is ready to assist you. Reach out via your preferred channel below, or use the inquiry form.
Get in Touch
Business Hours
Monday – Saturday, 9:30 AM – 6:30 PM (GMT +8)
Current Time:
Follow Us
- Choosing a selection results in a full page refresh.