2024-2026+ Zeekr 007 Carbon Ceramic Brake Kit
Official Warranty: 1‑year free replacement for quality defects or coating issues under normal (non-track) use.
2024-2026+ Zeekr 007 Carbon Ceramic Brake Kit — OEM-Size Replacement
The Zeekr 007 is a heavy, high-output BEV, so repeated high-speed stops put sustained heat into the factory-size 380 mm front and 340 mm rear brake package. This StopFlex OEM Replacement kit keeps the original rotor diameters and caliper locations while replacing the discs with carbon-ceramic rotors, matched pads, hats, and floating hardware to reduce heat fade, brake dust, and rotating unsprung mass without changing the brake layout.
- Built around the Zeekr 007 rotor references listed for this page: 380 mm front and 340 mm rear.
- OEM-size replacement design keeps the factory caliper position and brake bias architecture instead of converting the car to a big-brake kit.
- Carbon-ceramic friction rings reduce iron brake dust on the Zeekr 007’s 19- and 20-inch wheel packages and cut rotating mass at both axles.
Fitment Hard Lines
| Field | Specification |
|---|---|
| Vehicle | Zeekr 007 |
| Model years | 2024-2026+ |
| Front rotor reference | 007: 380mm |
| Rear rotor reference | 007: 340mm |
| Page type | OEM-size carbon ceramic replacement |
| Minimum wheel size | 15" (for the 7 mm rotor) |
For OEM replacement orders, StopFlex builds around the factory rotor specification shown for this vehicle. Front floating-caliper setups require manual review before production. If the car uses aftermarket calipers such as Brembo, AP Racing, Alcon, or Wilwood, the order can still be built, but the exact caliper model, pad shape, and rotor dimensions must be confirmed before production.
This setup uses a 7 mm rotor, so the minimum wheel size is 15". Wheels under 15" will not clear the caliper and rotor, and spoke profile and offset affect clearance too — confirm your exact wheels before ordering.
Why StopFlex CCB
Lower Unsprung Mass
StopFlex carbon-ceramic rotors are engineered to reduce rotor mass versus comparable iron discs, helping the suspension react cleaner and the steering feel more precise.
High-Temperature Stability
The carbon-silicon-carbide matrix is built for stable braking behavior at temperatures that can push iron rotors into heavy fade.
Rust-Free Rotor Surface
Carbon ceramic does not form orange flash rust after rain, washing, or storage, keeping the visible rotor face cleaner behind open wheels.
Long Street-Service Potential
In normal road use with matched pads and proper bedding, StopFlex CCB rotors are designed for far longer service life than typical iron replacement rotors.
Low Visible Dust
When paired with matched StopFlex pads, the system produces very low visible brake dust compared with conventional iron rotor and pad combinations.
Premium Ceramic-Glaze Appearance
StopFlex's proprietary coating creates a bright, high-end ceramic-glaze finish with subtle glaze texture and a more premium visual character behind open wheels.
Street-Usable Cold Bite
Street Spec and Track-Day Spec rotors are designed for normal first-stop road use, including cold-weather operation. Motorsport Spec is the competition-focused exception.
Continuous Fiber Reinforcement
Long-fiber carbon ceramic construction improves structural strength and thermal durability versus chopped-fiber approaches.
Custom Rotor Hat Color
Every StopFlex OEM replacement order can be built with a custom rotor hat color, giving the carbon ceramic rotor package a cleaner match with the wheel, body color, and overall build style.
Heat Management Note
Carbon ceramic rotors tolerate extreme surface temperature, but they do not remove every heat-management requirement. During repeated hard stops, heat can still soak into pads, fluid, seals, calipers, wheels, and nearby components. For long track sessions, mountain descents, or sustained aggressive driving, brake cooling and high-temperature fluid are still recommended.
Street / Track-Day / Motorsport Rotor Options
Street Spec
Ceramic coating, cross-drilled face, and large cooling channels.
Best for daily driving and premium street builds that need clean cold bite, low dust, corrosion-free appearance, and long service life.
Track-Day Spec
Ceramic coating, blank face, and honeycomb cooling channels.
Best for fast-road and track-day use where repeated braking stability matters more than maximum visual drilling style.
Motorsport Spec
Uncoated blank face with honeycomb cooling channels.
Best for race-focused builds that run competition pads, high-temperature fluid, cooling strategy, and a proper warm-up window. Not the default street choice.
Package Scope
| Item | Details |
|---|---|
| CCB rotors | Full-car set by default |
| CCB brake pads | Matched for StopFlex carbon ceramic rotors |
| 7075 aluminum floating rotor hats | Vehicle-specific fitment |
| Stainless floating hardware | Full-car hardware set |
| Rotor hat color | Custom rotor hat colors are available for every OEM replacement order. |
| Order scope | Default listing is full-car set. Front-only or rear-only orders can be arranged after confirmation. |
FAQ
Will this kit fit every 2024-2026+ Zeekr 007?
No. Fitment is limited to Zeekr 007 trims that use the 380 mm front and 340 mm rear rotor setup listed on this page. Confirm your current rotor diameters, wheel package, and caliper configuration before ordering.
Does the rear electronic parking brake still work?
Yes, when installed on the correct 340 mm rear Zeekr 007 setup. The StopFlex kit replaces the rotors, pads, hats, and floating hardware; it does not require deleting the factory rear caliper or EPB function.
Why switch from the OEM iron rotors to carbon ceramic on this car?
The Zeekr 007’s BEV weight and strong regenerative-to-friction brake transitions can still load the friction brakes during repeated high-speed stops. Carbon-ceramic rotors handle heat with less fade, produce less visible dust, and reduce rotating unsprung mass compared with iron discs.
What should I verify before placing an order?
Measure or confirm the 380 mm front and 340 mm rear rotor sizes, check that your wheels clear the factory brake package, and confirm whether your car is RWD or AWD Performance only for compatibility documentation. This page is for the OEM-size Zeekr 007 brake setup, not a caliper conversion.
Need Fitment Confirmation?
Send the exact vehicle details, current rotor sizes, and caliper type before ordering.
More Contact Information
We’re here to help! Whether you need expert advice on brake setups, have questions about your order, or just want to share feedback, our team is ready to assist you. Reach out via your preferred channel below, or use the inquiry form.
Get in Touch
Business Hours
Monday – Saturday, 9:30 AM – 6:30 PM (GMT +8)
Current Time:
Follow Us
- Choosing a selection results in a full page refresh.