2014-2019 Lamborghini Huracan 580 / 610 Carbon Ceramic Brake Kit
Official Warranty: 1‑year free replacement for quality defects or coating issues under normal (non-track) use.
2014-2019 Lamborghini Huracan 580 / 610 Carbon Ceramic Brake Kit — OEM-Size Replacement
This OEM-size StopFlex kit is for 2014-2019 Huracan 580 / 610 cars using the 380 mm front and 355 mm rear brake package, where owners are usually replacing worn or cracked carbon-ceramic rotors or moving away from heavy iron discs. The carbon-ceramic rings, matched pads, hats, and floating hardware keep the factory brake envelope while reducing heat fade, brake dust, and rotating mass compared with an iron setup. Fitment is limited to the listed LP580 and LP610 trims with these rotor sizes, so rotor diameter and caliper package should be confirmed before ordering.
- Built around the Huracan 580 / 610 OEM-size 380 mm front and 355 mm rear rotor references, not an oversized big-brake conversion.
- Kit includes carbon-ceramic rotors, matched pads, hats, and floating hardware for the factory-style floating rotor assembly on the first-generation Huracan platform.
- Targets the common Huracan ownership decision: replace expensive OEM carbon-ceramic wear parts or reduce iron-rotor dust and mass without changing the factory caliper layout.
Fitment Hard Lines
| Field | Specification |
|---|---|
| Vehicle | Lamborghini Huracan 580 / 610 |
| Model years | 2014-2019 |
| Front rotor reference | 380mm |
| Rear rotor reference | 355mm |
| Page type | OEM-size carbon ceramic replacement |
| Minimum wheel size | 19" (for the 380 mm rotor) |
For OEM replacement orders, StopFlex builds around the factory rotor specification shown for this vehicle. Front floating-caliper setups require manual review before production. If the car uses aftermarket calipers such as Brembo, AP Racing, Alcon, or Wilwood, the order can still be built, but the exact caliper model, pad shape, and rotor dimensions must be confirmed before production.
This setup uses a 380 mm rotor, so the minimum wheel size is 19". Wheels under 19" will not clear the caliper and rotor, and spoke profile and offset affect clearance too — confirm your exact wheels before ordering.
Why StopFlex CCB
Lower Unsprung Mass
StopFlex carbon-ceramic rotors are engineered to reduce rotor mass versus comparable iron discs, helping the suspension react cleaner and the steering feel more precise.
High-Temperature Stability
The carbon-silicon-carbide matrix is built for stable braking behavior at temperatures that can push iron rotors into heavy fade.
Rust-Free Rotor Surface
Carbon ceramic does not form orange flash rust after rain, washing, or storage, keeping the visible rotor face cleaner behind open wheels.
Long Street-Service Potential
In normal road use with matched pads and proper bedding, StopFlex CCB rotors are designed for far longer service life than typical iron replacement rotors.
Low Visible Dust
When paired with matched StopFlex pads, the system produces very low visible brake dust compared with conventional iron rotor and pad combinations.
Premium Ceramic-Glaze Appearance
StopFlex's proprietary coating creates a bright, high-end ceramic-glaze finish with subtle glaze texture and a more premium visual character behind open wheels.
Street-Usable Cold Bite
Street Spec and Track-Day Spec rotors are designed for normal first-stop road use, including cold-weather operation. Motorsport Spec is the competition-focused exception.
Continuous Fiber Reinforcement
Long-fiber carbon ceramic construction improves structural strength and thermal durability versus chopped-fiber approaches.
Custom Rotor Hat Color
Every StopFlex OEM replacement order can be built with a custom rotor hat color, giving the carbon ceramic rotor package a cleaner match with the wheel, body color, and overall build style.
Heat Management Note
Carbon ceramic rotors tolerate extreme surface temperature, but they do not remove every heat-management requirement. During repeated hard stops, heat can still soak into pads, fluid, seals, calipers, wheels, and nearby components. For long track sessions, mountain descents, or sustained aggressive driving, brake cooling and high-temperature fluid are still recommended.
Street / Track-Day / Motorsport Rotor Options
Street Spec
Ceramic coating, cross-drilled face, and large cooling channels.
Best for daily driving and premium street builds that need clean cold bite, low dust, corrosion-free appearance, and long service life.
Track-Day Spec
Ceramic coating, blank face, and honeycomb cooling channels.
Best for fast-road and track-day use where repeated braking stability matters more than maximum visual drilling style.
Motorsport Spec
Uncoated blank face with honeycomb cooling channels.
Best for race-focused builds that run competition pads, high-temperature fluid, cooling strategy, and a proper warm-up window. Not the default street choice.
Package Scope
| Item | Details |
|---|---|
| CCB rotors | Full-car set by default |
| CCB brake pads | Matched for StopFlex carbon ceramic rotors |
| 7075 aluminum floating rotor hats | Vehicle-specific fitment |
| Stainless floating hardware | Full-car hardware set |
| Rotor hat color | Custom rotor hat colors are available for every OEM replacement order. |
| Order scope | Default listing is full-car set. Front-only or rear-only orders can be arranged after confirmation. |
FAQ
Will this kit fit every 2014-2019 Huracan?
No. This page is only for 2014-2019 Lamborghini Huracan 580 / 610 applications using the 380 mm front and 355 mm rear brake sizes listed here. Confirm your trim, current rotor diameters, and caliper package before ordering.
Does the rear electronic parking brake still work?
Yes, when the kit is installed with the compatible factory rear caliper and actuator arrangement. The StopFlex rear rotor is sized to the 355 mm Huracan rear brake reference, so the EPB hardware is not converted to a different brake architecture.
Why choose carbon-ceramic instead of replacement iron rotors?
Carbon-ceramic rotors reduce brake dust on the Huracan’s open wheel designs, cut rotating and unsprung mass versus iron discs, and maintain more consistent friction behavior during repeated high-speed stops when paired with the supplied pads.
What should I check before placing the order?
Verify that your Huracan is an LP580 or LP610 from the 2014-2019 generation, measure or confirm 380 mm front and 355 mm rear rotors, and note any non-factory wheels or calipers so barrel and spoke clearance can be checked.
Need Fitment Confirmation?
Send the exact vehicle details, current rotor sizes, and caliper type before ordering.
More Contact Information
We’re here to help! Whether you need expert advice on brake setups, have questions about your order, or just want to share feedback, our team is ready to assist you. Reach out via your preferred channel below, or use the inquiry form.
Get in Touch
Business Hours
Monday – Saturday, 9:30 AM – 6:30 PM (GMT +8)
Current Time:
Follow Us
- Choosing a selection results in a full page refresh.