2016-2019 Cadillac ATS-V Carbon Ceramic Brake Kit
Official Warranty: 1‑year free replacement for quality defects or coating issues under normal (non-track) use.
2016-2019 Cadillac ATS-V Carbon Ceramic Brake Kit — OEM-Size Replacement
The 2016-2019 Cadillac ATS-V uses large factory Brembo hardware, and owners shopping carbon ceramic usually want to reduce repeated high-heat rotor stress, brake dust, and front-end mass without changing the car’s OEM brake package. This StopFlex OEM-size replacement kit is built around the ATS-V 370 mm front and 339 mm rear rotor references, with carbon-ceramic rotors, pads, hats, and floating hardware matched to the factory-style setup. It is intended for ATS-V cars with the listed rotor sizes only, so the caliper, wheel, and parking-brake system can remain in the original vehicle architecture.
- Fits the 2016-2019 Cadillac ATS-V brake package listed for this page: 370 mm front rotor reference and 339 mm rear rotor reference.
- Designed around the ATS-V factory Brembo layout, including the large front fixed caliper and matching rear brake package used on the V-Series model.
- Carbon-ceramic rotors reduce brake dust and rotating mass compared with iron rotors, which matters on ATS-V open-wheel fitments and track-day brake-temperature cycles.
Fitment Hard Lines
| Field | Specification |
|---|---|
| Vehicle | Cadillac ATS-V |
| Model years | 2016-2019 |
| Front rotor reference | ATS-V: 370mm |
| Rear rotor reference | ATS-V: 339mm |
| Page type | OEM-size carbon ceramic replacement |
| Minimum wheel size | 19" (for the 370 mm rotor) |
For OEM replacement orders, StopFlex builds around the factory rotor specification shown for this vehicle. Front floating-caliper setups require manual review before production. If the car uses aftermarket calipers such as Brembo, AP Racing, Alcon, or Wilwood, the order can still be built, but the exact caliper model, pad shape, and rotor dimensions must be confirmed before production.
This setup uses a 370 mm rotor, so the minimum wheel size is 19". Wheels under 19" will not clear the caliper and rotor, and spoke profile and offset affect clearance too — confirm your exact wheels before ordering.
Why StopFlex CCB
Lower Unsprung Mass
StopFlex carbon-ceramic rotors are engineered to reduce rotor mass versus comparable iron discs, helping the suspension react cleaner and the steering feel more precise.
High-Temperature Stability
The carbon-silicon-carbide matrix is built for stable braking behavior at temperatures that can push iron rotors into heavy fade.
Rust-Free Rotor Surface
Carbon ceramic does not form orange flash rust after rain, washing, or storage, keeping the visible rotor face cleaner behind open wheels.
Long Street-Service Potential
In normal road use with matched pads and proper bedding, StopFlex CCB rotors are designed for far longer service life than typical iron replacement rotors.
Low Visible Dust
When paired with matched StopFlex pads, the system produces very low visible brake dust compared with conventional iron rotor and pad combinations.
Premium Ceramic-Glaze Appearance
StopFlex's proprietary coating creates a bright, high-end ceramic-glaze finish with subtle glaze texture and a more premium visual character behind open wheels.
Street-Usable Cold Bite
Street Spec and Track-Day Spec rotors are designed for normal first-stop road use, including cold-weather operation. Motorsport Spec is the competition-focused exception.
Continuous Fiber Reinforcement
Long-fiber carbon ceramic construction improves structural strength and thermal durability versus chopped-fiber approaches.
Custom Rotor Hat Color
Every StopFlex OEM replacement order can be built with a custom rotor hat color, giving the carbon ceramic rotor package a cleaner match with the wheel, body color, and overall build style.
Heat Management Note
Carbon ceramic rotors tolerate extreme surface temperature, but they do not remove every heat-management requirement. During repeated hard stops, heat can still soak into pads, fluid, seals, calipers, wheels, and nearby components. For long track sessions, mountain descents, or sustained aggressive driving, brake cooling and high-temperature fluid are still recommended.
Street / Track-Day / Motorsport Rotor Options
Street Spec
Ceramic coating, cross-drilled face, and large cooling channels.
Best for daily driving and premium street builds that need clean cold bite, low dust, corrosion-free appearance, and long service life.
Track-Day Spec
Ceramic coating, blank face, and honeycomb cooling channels.
Best for fast-road and track-day use where repeated braking stability matters more than maximum visual drilling style.
Motorsport Spec
Uncoated blank face with honeycomb cooling channels.
Best for race-focused builds that run competition pads, high-temperature fluid, cooling strategy, and a proper warm-up window. Not the default street choice.
Package Scope
| Item | Details |
|---|---|
| CCB rotors | Full-car set by default |
| CCB brake pads | Matched for StopFlex carbon ceramic rotors |
| 7075 aluminum floating rotor hats | Vehicle-specific fitment |
| Stainless floating hardware | Full-car hardware set |
| Rotor hat color | Custom rotor hat colors are available for every OEM replacement order. |
| Order scope | Default listing is full-car set. Front-only or rear-only orders can be arranged after confirmation. |
FAQ
Will this kit fit every 2016-2019 Cadillac ATS-V?
It is limited to 2016-2019 Cadillac ATS-V cars with the rotor sizes listed on this page: 370 mm front and 339 mm rear. Confirm your existing rotor diameters, caliper package, and wheel clearance before ordering.
Does the kit keep the ATS-V electronic parking brake?
Yes, this is an OEM-size replacement rotor and pad package, not a rear brake conversion. The ATS-V rear parking-brake hardware stays in the factory system when the correct 339 mm rear setup is present.
Why switch an ATS-V from iron rotors to carbon ceramic?
Carbon ceramic is chosen to cut brake dust, reduce rotating and unsprung mass, and improve resistance to heat-related fade during repeated hard stops. That directly addresses common ATS-V use cases such as road-course sessions, mountain driving, and keeping open wheels cleaner.
What should I verify before placing the order?
Verify the car is a 2016-2019 ATS-V, measure or confirm the 370 mm front and 339 mm rear rotor package, check that the wheels clear the factory Brembo calipers, and note any non-OEM brake or wheel modifications.
Need Fitment Confirmation?
Send the exact vehicle details, current rotor sizes, and caliper type before ordering.
More Contact Information
We’re here to help! Whether you need expert advice on brake setups, have questions about your order, or just want to share feedback, our team is ready to assist you. Reach out via your preferred channel below, or use the inquiry form.
Get in Touch
Business Hours
Monday – Saturday, 9:30 AM – 6:30 PM (GMT +8)
Current Time:
Follow Us
- Choosing a selection results in a full page refresh.