2019-2026+ BMW X7 M50i / M60i (G07) Carbon Ceramic Brake Kit
Official Warranty: 1‑year free replacement for quality defects or coating issues under normal (non-track) use.
2019-2026+ BMW X7 M50i / M60i (G07) Carbon Ceramic Brake Kit — OEM-Size Replacement
The G07 BMW X7 M50i and M60i ask a large factory brake package to manage SUV mass, V8 torque, highway speed, and repeated downhill or towing stops. This StopFlex OEM-size carbon-ceramic kit replaces the factory-size 395mm front rotors, with 370mm rear rotors for X7 M50i and 398mm rear rotors for X7 M60i, using matching pads, hats, and floating hardware. The payoff is higher thermal stability than iron, lower brake dust on large open BMW wheels, reduced rotating mass, and fitment aimed at the exact M50i/M60i brake configuration listed here.
- Front axle is built around the X7 M50i/M60i 395mm rotor reference, matching the large factory front brake package instead of converting to a different caliper layout.
- Rear fitment is trim-specific: X7 M50i uses the 370mm rear rotor reference, while X7 M60i uses the 398mm rear rotor reference.
- Carbon-ceramic friction rings reduce brake dust and rotating mass on the G07 X7, a heavy three-row BMW where wheel cleanliness, steering response, and heat control matter in daily and high-speed use.
Fitment Hard Lines
| Field | Specification |
|---|---|
| Vehicle | BMW X7 M50i / M60i (G07) |
| Model years | 2019-2026+ |
| Front rotor reference | X7 M50i/M60i: 395mm |
| Rear rotor reference | X7 M50i: 370mm; X7 M60i: 398mm |
| Page type | OEM-size carbon ceramic replacement |
| Minimum wheel size | 20" (for the 395 mm rotor) |
For OEM replacement orders, StopFlex builds around the factory rotor specification shown for this vehicle. Front floating-caliper setups require manual review before production. If the car uses aftermarket calipers such as Brembo, AP Racing, Alcon, or Wilwood, the order can still be built, but the exact caliper model, pad shape, and rotor dimensions must be confirmed before production.
This setup uses a 395 mm rotor, so the minimum wheel size is 20". Wheels under 20" will not clear the caliper and rotor, and spoke profile and offset affect clearance too — confirm your exact wheels before ordering.
Why StopFlex CCB
Lower Unsprung Mass
StopFlex carbon-ceramic rotors are engineered to reduce rotor mass versus comparable iron discs, helping the suspension react cleaner and the steering feel more precise.
High-Temperature Stability
The carbon-silicon-carbide matrix is built for stable braking behavior at temperatures that can push iron rotors into heavy fade.
Rust-Free Rotor Surface
Carbon ceramic does not form orange flash rust after rain, washing, or storage, keeping the visible rotor face cleaner behind open wheels.
Long Street-Service Potential
In normal road use with matched pads and proper bedding, StopFlex CCB rotors are designed for far longer service life than typical iron replacement rotors.
Low Visible Dust
When paired with matched StopFlex pads, the system produces very low visible brake dust compared with conventional iron rotor and pad combinations.
Premium Ceramic-Glaze Appearance
StopFlex's proprietary coating creates a bright, high-end ceramic-glaze finish with subtle glaze texture and a more premium visual character behind open wheels.
Street-Usable Cold Bite
Street Spec and Track-Day Spec rotors are designed for normal first-stop road use, including cold-weather operation. Motorsport Spec is the competition-focused exception.
Continuous Fiber Reinforcement
Long-fiber carbon ceramic construction improves structural strength and thermal durability versus chopped-fiber approaches.
Custom Rotor Hat Color
Every StopFlex OEM replacement order can be built with a custom rotor hat color, giving the carbon ceramic rotor package a cleaner match with the wheel, body color, and overall build style.
Heat Management Note
Carbon ceramic rotors tolerate extreme surface temperature, but they do not remove every heat-management requirement. During repeated hard stops, heat can still soak into pads, fluid, seals, calipers, wheels, and nearby components. For long track sessions, mountain descents, or sustained aggressive driving, brake cooling and high-temperature fluid are still recommended.
Street / Track-Day / Motorsport Rotor Options
Street Spec
Ceramic coating, cross-drilled face, and large cooling channels.
Best for daily driving and premium street builds that need clean cold bite, low dust, corrosion-free appearance, and long service life.
Track-Day Spec
Ceramic coating, blank face, and honeycomb cooling channels.
Best for fast-road and track-day use where repeated braking stability matters more than maximum visual drilling style.
Motorsport Spec
Uncoated blank face with honeycomb cooling channels.
Best for race-focused builds that run competition pads, high-temperature fluid, cooling strategy, and a proper warm-up window. Not the default street choice.
Package Scope
| Item | Details |
|---|---|
| CCB rotors | Full-car set by default |
| CCB brake pads | Matched for StopFlex carbon ceramic rotors |
| 7075 aluminum floating rotor hats | Vehicle-specific fitment |
| Stainless floating hardware | Full-car hardware set |
| Rotor hat color | Custom rotor hat colors are available for every OEM replacement order. |
| Order scope | Default listing is full-car set. Front-only or rear-only orders can be arranged after confirmation. |
FAQ
Will this kit fit every 2019-2026+ BMW X7 G07?
No. This page is only for G07 X7 M50i and X7 M60i models with the rotor sizes listed here: 395mm front, 370mm rear for M50i, and 398mm rear for M60i. Confirm trim, model year, and measured rotor diameter before ordering.
Does the kit keep the factory electronic parking brake and auto-hold functions?
Yes, this is an OEM-size rotor, pad, hat, and floating-hardware replacement for the factory brake layout, so the rear caliper and electronic parking brake system remain in use. It is not a rear caliper conversion.
Why switch a BMW X7 M50i or M60i from iron rotors to carbon-ceramic?
The main gains are lower dust, lower rotating mass, and better thermal stability during repeated high-energy stops. On a V8 G07 X7, that matters most for heavy daily use, mountain driving, towing-related heat, and owners who dislike iron rotor dust on large BMW wheels.
What should I verify before ordering?
Verify that the vehicle is an X7 M50i or X7 M60i, confirm the front 395mm rotor size, and confirm the correct rear size for the trim: 370mm for M50i or 398mm for M60i. Also confirm wheel clearance if the vehicle has non-factory wheels.
Need Fitment Confirmation?
Send the exact vehicle details, current rotor sizes, and caliper type before ordering.
More Contact Information
We’re here to help! Whether you need expert advice on brake setups, have questions about your order, or just want to share feedback, our team is ready to assist you. Reach out via your preferred channel below, or use the inquiry form.
Get in Touch
Business Hours
Monday – Saturday, 9:30 AM – 6:30 PM (GMT +8)
Current Time:
Follow Us
- Choosing a selection results in a full page refresh.