2024-2026+ Porsche Panamera Turbo E-Hybrid (976) CCB Big Brake Kit | Akebono 10N 10-Piston
Official Warranty: 1‑year free replacement for quality defects or coating issues under normal (non-track) use.
We Ship Worldwide
2024-2026+ Porsche Panamera (976) Turbo E-Hybrid / Turbo S E-Hybrid CCB Big Brake Kit — Genuine Akebono OEM Porsche 10-Piston (10N) Caliper Front + Genuine Brembo OEM Porsche 19Z 4-Piston Caliper Rear Setup
The 2024-2026+ Panamera 976 Turbo E-Hybrid and Turbo S E-Hybrid put heavy hybrid mass, high speed, and regenerative brake blending into the same brake system, so owners shopping this kit are usually trying to reduce heat load, dust, and replacement cost while keeping Porsche brake behavior intact. This StopFlex kit pairs 440mm front carbon-ceramic rotors with the Genuine Akebono OEM Porsche 10-Piston (10N) Caliper and 410mm rear carbon-ceramic rotors with the Genuine Brembo OEM Porsche 19Z 4-Piston Caliper for higher thermal capacity, lower rotating mass than iron, and a caliper package sized around this car’s front-heavy braking demand. Each kit is engineered after the exact Turbo E-Hybrid or Turbo S E-Hybrid configuration is confirmed, including brackets, hat offsets, caliper mounting, brake lines, and 22-inch wheel clearance.
- 440mm front carbon-ceramic rotors require 22-inch or larger wheels on the Panamera 976; wheels under 22 inches will not clear the rotor package, and spoke clearance must still be checked.
- Front braking is handled by the Genuine Akebono OEM Porsche 10-Piston (10N) Caliper, matched to a 440mm rotor for the heat load of the V8 plug-in-hybrid Panamera Turbo models.
- The rear package uses the Genuine Brembo OEM Porsche 19Z 4-Piston Caliper with a 410mm carbon-ceramic rotor, preserving rear axle contribution instead of leaving the car with a front-only brake imbalance.
Fitment Hard Lines
| Field | Specification |
|---|---|
| Vehicle | Porsche Panamera (976) Turbo E-Hybrid / Turbo S E-Hybrid |
| Model years | 2024-2026+ |
| Front setup | Genuine Akebono OEM Porsche 10-Piston (10N) Caliper / 440mm |
| Rear setup | Genuine Brembo OEM Porsche 19Z 4-Piston Caliper / 410mm |
| Page type | Complete CCB kit upgrade |
| Minimum wheel size | 22" (for the 440 mm front rotor) |
Every StopFlex kit is bespoke-engineered for your exact model and trim — the brackets, rotor-hat offsets, and caliper mounting are matched to your specific car, not assumed from the platform. This matters because trims that share a chassis name can differ mechanically: a pure M or performance variant often carries different front knuckles/uprights, hub geometry, and wheel axial (ET) clearance than the standard models in the same family, so a bracket and hat offset that bolt onto one are not the same parts that fit the other. StopFlex supplies the calipers, pads, rotor hats, floating hardware, and brake lines as a matched system built to your confirmed trim. Cars with modified knuckles, modified uprights, or non-factory suspension mounting points must be reviewed before ordering and are not treated as direct-fit.
This setup uses a 440 mm front rotor, so the minimum wheel size is 22". Wheels under 22" will not clear the caliper and rotor, and spoke profile and offset affect clearance too — confirm your exact wheels before ordering.
| Wheel Size (Standard) | Disc Range |
|---|---|
| 15" | 260 mm – 285 mm |
| 16" | 285 mm – 300 mm |
| 17" | 300 mm – 330 mm |
| 18" | 330 mm – 355 mm |
| 19" | 355 mm – 380 mm |
| 20" | 380 mm – 400 mm |
| 21" | 400 mm – 420 mm |
| 22" | 420 mm – 440 mm |
Caliper Overview — Front & Rear Balance
Front Caliper (Primary Upgrade)
The front upgrade uses the Genuine Akebono OEM Porsche 10-Piston (10N) Caliper, a ten-piston OEM-derived Porsche caliper selected to spread pad pressure evenly across the large front pad area and support a firm, repeatable pedal on a 440mm rotor. Its provenance matters on this chassis because the Panamera 976 Turbo E-Hybrid and Turbo S E-Hybrid need a high-stiffness front caliper package that works with Porsche-style hydraulic feel rather than a generic aftermarket casting.
Rear Caliper (Balance)
The rear axle uses the Genuine Brembo OEM Porsche 19Z 4-Piston Caliper with a 410mm carbon-ceramic rotor so rear brake torque, stability, and pad temperature are matched to the front conversion. The kit is designed around the factory electronic parking brake environment and Porsche pad-wear sensor logic, so the OEM pad-wear warning remains functional with no dashboard errors.
Front & rear, engineered together: The 440mm front and 410mm rear carbon-ceramic packages are engineered as one system so hydraulic balance, pad volume, thermal capacity, and rotor-hat offsets are matched for the confirmed Panamera trim. A front-only conversion on this car can add front bite without correcting rear heat capacity or bias behavior; this kit avoids that mismatch by specifying both axles together.
Make It Yours — Color & Logo Customization
Every StopFlex kit-upgrade order can be finished with custom caliper colors, a custom caliper logo, and custom rotor hat colors, so the brake package matches your exact build instead of a fixed off-the-shelf look.
- Custom caliper color
- Custom caliper logo
- Custom rotor hat color
Why StopFlex CCB
Lower Unsprung Mass
StopFlex carbon-ceramic rotors are engineered to reduce rotor mass versus comparable iron discs, helping the suspension react cleaner and the steering feel more precise.
High-Temperature Stability
The carbon-silicon-carbide matrix is built for stable braking behavior at temperatures that can push iron rotors into heavy fade.
Rust-Free Rotor Surface
Carbon ceramic does not form orange flash rust after rain, washing, or storage, keeping the visible rotor face cleaner behind open wheels.
Long Street-Service Potential
In normal road use with matched pads and proper bedding, StopFlex CCB rotors are designed for far longer service life than typical iron replacement rotors.
Low Visible Dust
When paired with matched StopFlex pads, the system produces very low visible brake dust compared with conventional iron rotor and pad combinations.
Premium Ceramic-Glaze Appearance
StopFlex's proprietary coating creates a bright, high-end ceramic-glaze finish with subtle glaze texture and a more premium visual character behind open wheels.
Street-Usable Cold Bite
Street Spec and Track-Day Spec rotors are designed for normal first-stop road use, including cold-weather operation. Motorsport Spec is the competition-focused exception.
Continuous Fiber Reinforcement
Long-fiber carbon ceramic construction improves structural strength and thermal durability versus chopped-fiber approaches.
Heat Management Note
Carbon ceramic rotors tolerate extreme surface temperature, but they do not remove every heat-management requirement. During repeated hard stops, heat can still soak into pads, fluid, seals, calipers, wheels, and nearby components. For long track sessions, mountain descents, or sustained aggressive driving, brake cooling and high-temperature fluid are still recommended.
Street / Track-Day / Motorsport Rotor Options
Street Spec
Ceramic coating, cross-drilled face, and large cooling channels.
Best for daily driving and premium street builds that need clean cold bite, low dust, corrosion-free appearance, and long service life.
Track-Day Spec
Ceramic coating, blank face, and honeycomb cooling channels.
Best for fast-road and track-day use where repeated braking stability matters more than maximum visual drilling style.
Motorsport Spec
Uncoated blank face with honeycomb cooling channels.
Best for race-focused builds that run competition pads, high-temperature fluid, cooling strategy, and a proper warm-up window. Not the default street choice.
Package Scope
| Item | Details |
|---|---|
| Front calipers | Genuine Akebono OEM Porsche 10-Piston (10N) Caliper |
| Front CCB rotors | 440mm |
| Rear calipers | Genuine Brembo OEM Porsche 19Z 4-Piston Caliper |
| Rear CCB rotors | 410mm |
| CCB brake pads | Matched for the supplied StopFlex carbon ceramic rotors |
| Brake pad wear sensors | Included; 100% compatible with the OEM wear-sensor system. |
| Rotor hats and floating hardware | Vehicle-specific hardware package |
| Brake lines | Included for complete kit-upgrade orders |
| Color customization | Custom caliper colors, a custom caliper logo, and custom rotor hat colors are available for every kit-upgrade order. |
| Order scope | Default listing is full-car set when front and rear are specified. Front-only or rear-only orders can be arranged after confirmation. |
EPB & Rear Caliper Options
This vehicle leaves the factory with an electronic parking brake (EPB) built into the rear brake, so the rear of the kit is built to keep that EPB working. There are two rear paths. The first is a dual-caliper rear: a main performance caliper handles braking while a dedicated EPB actuator caliper is retained alongside it, so the electronic parking brake, auto-hold, and hill-start assist all keep working; on this path the rear performance caliper can be the TTSPORT EP4 / EP4S 4-piston caliper. The second is an EPB-integrated caliper, a single rear caliper with the electromechanical parking-brake motor built in for a cleaner install with fewer parts behind the wheel; on this path the rear is the TTSPORT EP4 / EP4S 4-piston caliper with integrated EPB. Which path fits best depends on your exact trim and EPB configuration, your budget, your appearance preference, and your wheel size and spoke clearance. Confirm your car's rear-brake configuration with StopFlex before ordering so the correct EPB-compatible rear option is built for your kit.
| Rear option | What it is | Rear caliper | Best when |
|---|---|---|---|
| Dual caliper (EPB retained) | Performance caliper plus a dedicated EPB actuator caliper, both fitted on the rear, so the factory electronic parking brake keeps working. | TTSPORT EP4 / EP4S 4-Piston Caliper | You want guaranteed factory EPB, auto-hold, and hill-start behavior preserved. |
| EPB-integrated caliper | A single rear caliper with the electromechanical parking-brake motor built in, for a cleaner install with fewer parts behind the wheel. | TTSPORT EP4 / EP4S 4-Piston Caliper with integrated EPB | You want a cleaner single-caliper rear with full EPB function. |
FAQ
Will this fit my exact 2024-2026+ Panamera 976 Turbo E-Hybrid or Turbo S E-Hybrid?
Fitment is confirmed per car before production. StopFlex verifies the exact trim, wheel package, caliper clearance, hub geometry, bracket design, rotor-hat offset, and line routing instead of assuming every Panamera 976 shares the same brake mounting dimensions.
What wheel size do I need for the 440mm front rotor?
This kit requires 22-inch or larger wheels because the front rotor is 440mm. Wheels under 22 inches will not clear the rotor, and even 22-inch wheels still need spoke-profile clearance checked against the Genuine Akebono OEM Porsche 10-Piston (10N) Caliper.
Will the electronic parking brake and pad-wear warning still work?
Yes. The Panamera 976 uses a factory electronic parking brake system, and this kit is configured to retain the OEM EPB environment. The Porsche brake pad wear sensors are 100% compatible with the OEM wear-sensor system, so the factory pad-wear warning continues to work without dashboard errors.
Why switch this Panamera from iron or dealer carbon-ceramic parts to StopFlex CCB?
The carbon-ceramic rotors reduce brake dust and rotating mass compared with iron while increasing heat tolerance for repeated high-speed stops. For owners replacing worn or cracked OEM carbon-ceramic components, the StopFlex kit also provides a complete caliper, rotor, pad, hat, hardware, and line package built around the confirmed Turbo E-Hybrid or Turbo S E-Hybrid configuration.
Need Fitment Confirmation?
Send the exact vehicle details, current rotor sizes, and caliper type before ordering.
More Contact Information
We’re here to help! Whether you need expert advice on brake setups, have questions about your order, or just want to share feedback, our team is ready to assist you. Reach out via your preferred channel below, or use the inquiry form.
Get in Touch
Business Hours
Monday – Saturday, 9:30 AM – 6:30 PM (GMT +8)
Current Time:
Follow Us
- Choosing a selection results in a full page refresh.