2022-2026+ Porsche Cayenne Turbo GT (9Y0) CCB Big Brake Kit | Akebono 10N 10-Piston
Official Warranty: 1‑year free replacement for quality defects or coating issues under normal (non-track) use.
We Ship Worldwide
2022-2026+ Porsche Cayenne (9Y0) Turbo GT CCB Big Brake Kit — Genuine Akebono OEM Porsche 10-Piston (10N) Caliper Front + Genuine Brembo OEM Porsche 19Z 4-Piston Caliper Rear Setup
The Cayenne Turbo GT is heavy, fast, and hard on brakes when driven repeatedly from highway or track speeds, which is why owners shop carbon ceramic kits for heat control, lower rotating mass, and cleaner open wheels. This StopFlex kit pairs a Genuine Akebono OEM Porsche 10-Piston (10N) Caliper with 420/440mm front carbon-ceramic rotors and a Genuine Brembo OEM Porsche 19Z 4-Piston rear package using 410/380mm rear rotors. Each kit is engineered to the confirmed Turbo GT trim so the rotor hats, brackets, caliper position, lines, and hardware match the actual car rather than a generic 9Y0 Cayenne assumption.
- The front package uses the named Genuine Akebono OEM Porsche 10-Piston (10N) Caliper with 420/440mm carbon-ceramic rotors for the heat load produced by a Cayenne Turbo GT.
- The rear package uses a Genuine Brembo OEM Porsche 19Z 4-Piston Caliper with 410/380mm carbon-ceramic rotors to keep rear brake contribution matched to the front upgrade.
- Because the largest rotor in this kit is 420mm, 21-inch wheels are the minimum; wheels under 21 inches will not clear, and spoke clearance still must be checked.
Fitment Hard Lines
| Field | Specification |
|---|---|
| Vehicle | Porsche Cayenne (9Y0) Turbo GT |
| Model years | 2022-2026+ |
| Front setup | Genuine Akebono OEM Porsche 10-Piston (10N) Caliper / 420/440mm |
| Rear setup | Genuine Brembo OEM Porsche 19Z 4-Piston Caliper / 410/380mm |
| Page type | Complete CCB kit upgrade |
| Minimum wheel size | 21" (for the 420 mm front rotor) |
Every StopFlex kit is bespoke-engineered for your exact model and trim — the brackets, rotor-hat offsets, and caliper mounting are matched to your specific car, not assumed from the platform. This matters because trims that share a chassis name can differ mechanically: a pure M or performance variant often carries different front knuckles/uprights, hub geometry, and wheel axial (ET) clearance than the standard models in the same family, so a bracket and hat offset that bolt onto one are not the same parts that fit the other. StopFlex supplies the calipers, pads, rotor hats, floating hardware, and brake lines as a matched system built to your confirmed trim. Cars with modified knuckles, modified uprights, or non-factory suspension mounting points must be reviewed before ordering and are not treated as direct-fit.
This setup uses a 420 mm front rotor, so the minimum wheel size is 21". Wheels under 21" will not clear the caliper and rotor, and spoke profile and offset affect clearance too — confirm your exact wheels before ordering.
| Wheel Size (Standard) | Disc Range |
|---|---|
| 15" | 260 mm – 285 mm |
| 16" | 285 mm – 300 mm |
| 17" | 300 mm – 330 mm |
| 18" | 330 mm – 355 mm |
| 19" | 355 mm – 380 mm |
| 20" | 380 mm – 400 mm |
| 21" | 400 mm – 420 mm |
| 22" | 420 mm – 440 mm |
Caliper Overview — Front & Rear Balance
Front Caliper (Primary Upgrade)
The front brake is built around the Genuine Akebono OEM Porsche 10-Piston (10N) Caliper, giving the Cayenne Turbo GT a large multi-piston clamp area for stable pad loading and a firm pedal under repeated high-speed stops. Its OEM Porsche provenance is important on this chassis because the caliper is not an anonymous universal casting; StopFlex engineers the bracket, radial position, and rotor-hat offset around this specific front caliper and the customer's confirmed Turbo GT hardware.
Rear Caliper (Balance)
The rear uses the Genuine Brembo OEM Porsche 19Z 4-Piston Caliper so rear torque contribution stays controlled instead of leaving the vehicle with an oversized front-only bias shift. The rear package is built to retain the Cayenne Turbo GT's electronic parking brake function where the vehicle is equipped from the factory.
Front & rear, engineered together: The Akebono 10-piston front and Brembo 4-piston rear are treated as one brake system, not two unrelated axle swaps. Matching rotor diameter, hat offset, caliper position, pad compound, lines, and hardware helps preserve braking stability, ABS behavior, and pedal consistency on a high-mass performance SUV.
Make It Yours — Color & Logo Customization
Every StopFlex kit-upgrade order can be finished with custom caliper colors, a custom caliper logo, and custom rotor hat colors, so the brake package matches your exact build instead of a fixed off-the-shelf look.
- Custom caliper color
- Custom caliper logo
- Custom rotor hat color
Why StopFlex CCB
Lower Unsprung Mass
StopFlex carbon-ceramic rotors are engineered to reduce rotor mass versus comparable iron discs, helping the suspension react cleaner and the steering feel more precise.
High-Temperature Stability
The carbon-silicon-carbide matrix is built for stable braking behavior at temperatures that can push iron rotors into heavy fade.
Rust-Free Rotor Surface
Carbon ceramic does not form orange flash rust after rain, washing, or storage, keeping the visible rotor face cleaner behind open wheels.
Long Street-Service Potential
In normal road use with matched pads and proper bedding, StopFlex CCB rotors are designed for far longer service life than typical iron replacement rotors.
Low Visible Dust
When paired with matched StopFlex pads, the system produces very low visible brake dust compared with conventional iron rotor and pad combinations.
Premium Ceramic-Glaze Appearance
StopFlex's proprietary coating creates a bright, high-end ceramic-glaze finish with subtle glaze texture and a more premium visual character behind open wheels.
Street-Usable Cold Bite
Street Spec and Track-Day Spec rotors are designed for normal first-stop road use, including cold-weather operation. Motorsport Spec is the competition-focused exception.
Continuous Fiber Reinforcement
Long-fiber carbon ceramic construction improves structural strength and thermal durability versus chopped-fiber approaches.
Heat Management Note
Carbon ceramic rotors tolerate extreme surface temperature, but they do not remove every heat-management requirement. During repeated hard stops, heat can still soak into pads, fluid, seals, calipers, wheels, and nearby components. For long track sessions, mountain descents, or sustained aggressive driving, brake cooling and high-temperature fluid are still recommended.
Street / Track-Day / Motorsport Rotor Options
Street Spec
Ceramic coating, cross-drilled face, and large cooling channels.
Best for daily driving and premium street builds that need clean cold bite, low dust, corrosion-free appearance, and long service life.
Track-Day Spec
Ceramic coating, blank face, and honeycomb cooling channels.
Best for fast-road and track-day use where repeated braking stability matters more than maximum visual drilling style.
Motorsport Spec
Uncoated blank face with honeycomb cooling channels.
Best for race-focused builds that run competition pads, high-temperature fluid, cooling strategy, and a proper warm-up window. Not the default street choice.
Package Scope
| Item | Details |
|---|---|
| Front calipers | Genuine Akebono OEM Porsche 10-Piston (10N) Caliper |
| Front CCB rotors | 420/440mm |
| Rear calipers | Genuine Brembo OEM Porsche 19Z 4-Piston Caliper |
| Rear CCB rotors | 410/380mm |
| CCB brake pads | Matched for the supplied StopFlex carbon ceramic rotors |
| Brake pad wear sensors | Included; 100% compatible with the OEM wear-sensor system. |
| Rotor hats and floating hardware | Vehicle-specific hardware package |
| Brake lines | Included for complete kit-upgrade orders |
| Color customization | Custom caliper colors, a custom caliper logo, and custom rotor hat colors are available for every kit-upgrade order. |
| Order scope | Default listing is full-car set when front and rear are specified. Front-only or rear-only orders can be arranged after confirmation. |
EPB & Rear Caliper Options
This vehicle leaves the factory with an electronic parking brake (EPB) built into the rear brake, so the rear of the kit is built to keep that EPB working. There are two rear paths. The first is a dual-caliper rear: a main performance caliper handles braking while a dedicated EPB actuator caliper is retained alongside it, so the electronic parking brake, auto-hold, and hill-start assist all keep working; on this path the rear performance caliper can be the TTSPORT EP4 / EP4S 4-piston caliper. The second is an EPB-integrated caliper, a single rear caliper with the electromechanical parking-brake motor built in for a cleaner install with fewer parts behind the wheel; on this path the rear is the TTSPORT EP4 / EP4S 4-piston caliper with integrated EPB. Which path fits best depends on your exact trim and EPB configuration, your budget, your appearance preference, and your wheel size and spoke clearance. Confirm your car's rear-brake configuration with StopFlex before ordering so the correct EPB-compatible rear option is built for your kit.
| Rear option | What it is | Rear caliper | Best when |
|---|---|---|---|
| Dual caliper (EPB retained) | Performance caliper plus a dedicated EPB actuator caliper, both fitted on the rear, so the factory electronic parking brake keeps working. | TTSPORT EP4 / EP4S 4-Piston Caliper | You want guaranteed factory EPB, auto-hold, and hill-start behavior preserved. |
| EPB-integrated caliper | A single rear caliper with the electromechanical parking-brake motor built in, for a cleaner install with fewer parts behind the wheel. | TTSPORT EP4 / EP4S 4-Piston Caliper with integrated EPB | You want a cleaner single-caliper rear with full EPB function. |
FAQ
Will this kit fit my exact 2022-2026+ Cayenne Turbo GT?
Fitment is confirmed against your exact Turbo GT before production. StopFlex does not assume that every 9Y0 Cayenne shares the same knuckle, hub geometry, wheel offset, or brake clearance; brackets, rotor-hat offsets, and caliper mounting are matched to your confirmed trim and wheel setup.
What wheel size is required for the 420/440mm front rotor setup?
The minimum wheel diameter is 21 inches because the largest rotor used in this kit is 420mm. Wheels under 21 inches will not clear, and spoke profile still matters because the Genuine Akebono OEM Porsche 10-Piston (10N) Caliper needs radial and face clearance.
Will the electronic parking brake and pad-wear warning still work?
Yes. The rear package is engineered around the Cayenne Turbo GT's factory electronic parking brake system, and the kit is compatible with Porsche brake pad wear sensors so the OEM pad-wear warning continues to function without dashboard errors.
Why switch this Cayenne Turbo GT to carbon ceramic brakes?
Carbon-ceramic rotors reduce brake dust, resist heat fade better than typical iron setups, and cut rotating and unsprung mass at the corners. On a Turbo GT, those benefits matter during repeated high-speed stops and for owners replacing worn or cracked factory carbon-ceramic components at lower cost than a dealer brake package.
Need Fitment Confirmation?
Send the exact vehicle details, current rotor sizes, and caliper type before ordering.
More Contact Information
We’re here to help! Whether you need expert advice on brake setups, have questions about your order, or just want to share feedback, our team is ready to assist you. Reach out via your preferred channel below, or use the inquiry form.
Get in Touch
Business Hours
Monday – Saturday, 9:30 AM – 6:30 PM (GMT +8)
Current Time:
Follow Us
- Choosing a selection results in a full page refresh.