2015-2023 Mercedes-Benz C-Class / AMG (W205/S205/C205/A205) CCB Big Brake Kit | OEM AMG 6-Piston
Official Warranty: 1‑year free replacement for quality defects or coating issues under normal (non-track) use.
We Ship Worldwide
2015-2023 Mercedes-Benz C180 / C200 / C300 / C400 / C450 / C43 / C63 / C63 S (W205/S205/C205/A205) CCB Big Brake Kit — Genuine OEM AMG 6-Piston Caliper Front + Genuine OEM AMG 4-Piston Caliper Rear Setup
This StopFlex kit is for W205/S205/C205/A205 C-Class owners who want the heat capacity and low-dust behavior of carbon-ceramic brakes without guessing whether an AMG-style brake package will fit their exact C180, C200, C300, C400, C450, C43, C63, or C63 S. The front axle uses a Genuine OEM AMG 6-Piston Caliper over a 390mm carbon-ceramic rotor, while the rear uses a Genuine OEM AMG 4-Piston Caliper over a 380mm rotor to keep brake torque balanced. Every kit is built around the confirmed trim, hub geometry, caliper mounting, rotor-hat offset, and wheel clearance; 20 inch wheels are the minimum because the 390mm front rotor will not clear smaller wheels.
- 390mm front and 380mm rear carbon-ceramic rotors give this W205/S205/C205/A205 C-Class kit the thermal mass needed for repeated high-speed braking with less iron-rotor dust on open AMG-style wheels.
- The front upgrade is centered on the exact Genuine OEM AMG 6-Piston Caliper specified for this kit, not a generic aftermarket caliper relabeled for the C-Class platform.
- C180/C200/C300/C400/C450 and AMG C43/C63/C63 S variants are validated separately because standard and AMG W205-family cars can differ in knuckles, hubs, caliper mounting, and wheel offset clearance.
Fitment Hard Lines
| Field | Specification |
|---|---|
| Vehicle | Mercedes-Benz C180 / C200 / C300 / C400 / C450 / C43 / C63 / C63 S (W205/S205/C205/A205) |
| Model years | 2015-2023 |
| Front setup | Genuine OEM AMG 6-Piston Caliper / 390mm |
| Rear setup | Genuine OEM AMG 4-Piston Caliper / 380mm |
| Page type | Complete CCB kit upgrade |
| Minimum wheel size | 20" (for the 390 mm front rotor) |
Every StopFlex kit is bespoke-engineered for your exact model and trim — the brackets, rotor-hat offsets, and caliper mounting are matched to your specific car, not assumed from the platform. This matters because trims that share a chassis name can differ mechanically: a pure M or performance variant often carries different front knuckles/uprights, hub geometry, and wheel axial (ET) clearance than the standard models in the same family, so a bracket and hat offset that bolt onto one are not the same parts that fit the other. StopFlex supplies the calipers, pads, rotor hats, floating hardware, and brake lines as a matched system built to your confirmed trim. Cars with modified knuckles, modified uprights, or non-factory suspension mounting points must be reviewed before ordering and are not treated as direct-fit.
This setup uses a 390 mm front rotor, so the minimum wheel size is 20". Wheels under 20" will not clear the caliper and rotor, and spoke profile and offset affect clearance too — confirm your exact wheels before ordering.
| Wheel Size (Standard) | Disc Range |
|---|---|
| 15" | 260 mm – 285 mm |
| 16" | 285 mm – 300 mm |
| 17" | 300 mm – 330 mm |
| 18" | 330 mm – 355 mm |
| 19" | 355 mm – 380 mm |
| 20" | 380 mm – 400 mm |
| 21" | 400 mm – 420 mm |
| 22" | 420 mm – 440 mm |
Caliper Overview — Front & Rear Balance
Front Caliper (Primary Upgrade)
The front axle uses the Genuine OEM AMG 6-Piston Caliper, giving the 390mm rotor a wide, stable pad sweep and firm hydraulic response under repeated braking. Its OEM AMG provenance matters on a W205-family C-Class because the caliper architecture was designed for high-performance Mercedes applications rather than adapted from a universal big-brake catalog. The caliper is paired with StopFlex carbon-ceramic rotors, matched hats, lines, brackets, pads, and hardware for the buyer’s confirmed trim.
Rear Caliper (Balance)
The rear axle uses the Genuine OEM AMG 4-Piston Caliper with a 380mm carbon-ceramic rotor to support front-to-rear brake balance instead of leaving the rear axle under-matched behind a 390mm front setup. For W205-family cars with factory electronic parking brake hardware, the rear package is configured to retain the EPB function when the vehicle data confirms the correct rear arrangement.
Front & rear, engineered together: The 390mm front and 380mm rear package is engineered as one system so pedal feel, brake bias, thermal capacity, and ABS/ESC behavior are kept within a coherent range. A front-only conversion can create a torque and temperature mismatch; this kit aligns caliper selection, rotor diameter, hat offset, pad compound, and line routing for the exact C-Class trim.
Make It Yours — Color & Logo Customization
Every StopFlex kit-upgrade order can be finished with custom caliper colors, a custom caliper logo, and custom rotor hat colors, so the brake package matches your exact build instead of a fixed off-the-shelf look.
- Custom caliper color
- Custom caliper logo
- Custom rotor hat color
Why StopFlex CCB
Lower Unsprung Mass
StopFlex carbon-ceramic rotors are engineered to reduce rotor mass versus comparable iron discs, helping the suspension react cleaner and the steering feel more precise.
High-Temperature Stability
The carbon-silicon-carbide matrix is built for stable braking behavior at temperatures that can push iron rotors into heavy fade.
Rust-Free Rotor Surface
Carbon ceramic does not form orange flash rust after rain, washing, or storage, keeping the visible rotor face cleaner behind open wheels.
Long Street-Service Potential
In normal road use with matched pads and proper bedding, StopFlex CCB rotors are designed for far longer service life than typical iron replacement rotors.
Low Visible Dust
When paired with matched StopFlex pads, the system produces very low visible brake dust compared with conventional iron rotor and pad combinations.
Premium Ceramic-Glaze Appearance
StopFlex's proprietary coating creates a bright, high-end ceramic-glaze finish with subtle glaze texture and a more premium visual character behind open wheels.
Street-Usable Cold Bite
Street Spec and Track-Day Spec rotors are designed for normal first-stop road use, including cold-weather operation. Motorsport Spec is the competition-focused exception.
Continuous Fiber Reinforcement
Long-fiber carbon ceramic construction improves structural strength and thermal durability versus chopped-fiber approaches.
Heat Management Note
Carbon ceramic rotors tolerate extreme surface temperature, but they do not remove every heat-management requirement. During repeated hard stops, heat can still soak into pads, fluid, seals, calipers, wheels, and nearby components. For long track sessions, mountain descents, or sustained aggressive driving, brake cooling and high-temperature fluid are still recommended.
Street / Track-Day / Motorsport Rotor Options
Street Spec
Ceramic coating, cross-drilled face, and large cooling channels.
Best for daily driving and premium street builds that need clean cold bite, low dust, corrosion-free appearance, and long service life.
Track-Day Spec
Ceramic coating, blank face, and honeycomb cooling channels.
Best for fast-road and track-day use where repeated braking stability matters more than maximum visual drilling style.
Motorsport Spec
Uncoated blank face with honeycomb cooling channels.
Best for race-focused builds that run competition pads, high-temperature fluid, cooling strategy, and a proper warm-up window. Not the default street choice.
Package Scope
| Item | Details |
|---|---|
| Front calipers | Genuine OEM AMG 6-Piston Caliper |
| Front CCB rotors | 390mm |
| Rear calipers | Genuine OEM AMG 4-Piston Caliper |
| Rear CCB rotors | 380mm |
| CCB brake pads | Matched for the supplied StopFlex carbon ceramic rotors |
| Rotor hats and floating hardware | Vehicle-specific hardware package |
| Brake lines | Included for complete kit-upgrade orders |
| Color customization | Custom caliper colors, a custom caliper logo, and custom rotor hat colors are available for every kit-upgrade order. |
| Order scope | Default listing is full-car set when front and rear are specified. Front-only or rear-only orders can be arranged after confirmation. |
EPB & Rear Caliper Options
This vehicle leaves the factory with an electronic parking brake (EPB) built into the rear brake, so the rear of the kit is built to keep that EPB working. There are two rear paths. The first is a dual-caliper rear: a main performance caliper handles braking while a dedicated EPB actuator caliper is retained alongside it, so the electronic parking brake, auto-hold, and hill-start assist all keep working; on this path the rear performance caliper can be the TTSPORT EP4 / EP4S 4-piston caliper. The second is an EPB-integrated caliper, a single rear caliper with the electromechanical parking-brake motor built in for a cleaner install with fewer parts behind the wheel; on this path the rear is the TTSPORT EP4 / EP4S 4-piston caliper with integrated EPB. Which path fits best depends on your exact trim and EPB configuration, your budget, your appearance preference, and your wheel size and spoke clearance. Confirm your car's rear-brake configuration with StopFlex before ordering so the correct EPB-compatible rear option is built for your kit.
| Rear option | What it is | Rear caliper | Best when |
|---|---|---|---|
| Dual caliper (EPB retained) | Performance caliper plus a dedicated EPB actuator caliper, both fitted on the rear, so the factory electronic parking brake keeps working. | TTSPORT EP4 / EP4S 4-Piston Caliper | You want guaranteed factory EPB, auto-hold, and hill-start behavior preserved. |
| EPB-integrated caliper | A single rear caliper with the electromechanical parking-brake motor built in, for a cleaner install with fewer parts behind the wheel. | TTSPORT EP4 / EP4S 4-Piston Caliper with integrated EPB | You want a cleaner single-caliper rear with full EPB function. |
FAQ
Will this kit fit my exact W205 C-Class trim?
Fitment is not treated as platform-wide. StopFlex builds the brackets, rotor-hat offsets, and caliper mounting around your confirmed C180, C200, C300, C400, C450, C43, C63, or C63 S because standard and AMG W205-family cars can differ in knuckle, hub, and wheel-clearance geometry.
What wheel size do I need for the 390mm front rotor?
The minimum wheel size is 20 inches. Wheels under 20 inches will not clear the 390mm front rotor, and spoke clearance still has to be checked against the Genuine OEM AMG 6-Piston Caliper before the kit is finalized.
Will the electronic parking brake still work?
Yes, the W205-family C-Class uses a factory electronic parking brake, and the rear portion of this kit is configured around the vehicle’s confirmed EPB arrangement. StopFlex verifies the rear caliper, actuator, line, and hardware requirements before production.
Why choose carbon-ceramic instead of replacement iron brakes?
Carbon-ceramic rotors reduce brake dust and rotating mass compared with iron rotors, and they handle repeated heat cycles more consistently when paired with the correct pads. On this C-Class kit, the 390mm front and 380mm rear rotor sizes add thermal capacity while the OEM AMG calipers preserve a Mercedes-based brake architecture.
Need Fitment Confirmation?
Send the exact vehicle details, current rotor sizes, and caliper type before ordering.
More Contact Information
We’re here to help! Whether you need expert advice on brake setups, have questions about your order, or just want to share feedback, our team is ready to assist you. Reach out via your preferred channel below, or use the inquiry form.
Get in Touch
Business Hours
Monday – Saturday, 9:30 AM – 6:30 PM (GMT +8)
Current Time:
Follow Us
- Choosing a selection results in a full page refresh.