2019-2024 BMW 1 Series (F40) CCB Big Brake Kit | Brembo GT500 6-Piston
Official Warranty: 1‑year free replacement for quality defects or coating issues under normal (non-track) use.
We Ship Worldwide
2019-2024 BMW 1 Series (F40) CCB Big Brake Kit — Genuine Brembo OEM Ford Shelby GT500 Mustang 6-Piston Caliper Front + Genuine Brembo GT4 Rear Setup
F40 1 Series owners usually shop this kit when repeated hard braking exposes the limits of factory iron rotors: heat soak, dust, pedal inconsistency, and limited visual fill behind larger wheels. This StopFlex upgrade pairs a 380 mm front carbon-ceramic rotor with the Genuine Brembo OEM Ford Shelby GT500 Mustang 6-Piston Caliper, then matches the rear with a 355 mm carbon-ceramic rotor and Brembo 4-piston option for a balanced system. Every bracket, hat offset, and caliper mount is engineered for the customer’s confirmed F40 trim, because 1 Series variants can differ in knuckle, hub, and wheel ET clearance.
- 380 mm is the largest rotor in this F40 kit, so 19 inch wheels are the minimum; barrel and spoke clearance must still be confirmed before production.
- Front braking uses the Genuine Brembo OEM Ford Shelby GT500 Mustang 6-Piston Caliper with a 380 mm carbon-ceramic rotor for higher thermal capacity than the factory F40 iron setup.
- Rear braking is matched with a 355 mm carbon-ceramic rotor and the customer’s selected Brembo V4, GT4, or GTS4 4-piston caliper option rather than leaving the rear bias to an unmatched factory setup.
Fitment Hard Lines
| Field | Specification |
|---|---|
| Vehicle | BMW 1 Series (F40) |
| Model years | 2019-2024 |
| Front setup | Genuine Brembo OEM Ford Shelby GT500 Mustang 6-Piston Caliper / 380mm |
| Rear setup | Brembo V4 / GT4 / GTS4 4-Piston Caliper Options / 355mm |
| Page type | Complete CCB kit upgrade |
| Minimum wheel size | 19" (for the 380 mm front rotor) |
Every StopFlex kit is bespoke-engineered for your exact model and trim — the brackets, rotor-hat offsets, and caliper mounting are matched to your specific car, not assumed from the platform. This matters because trims that share a chassis name can differ mechanically: a pure M or performance variant often carries different front knuckles/uprights, hub geometry, and wheel axial (ET) clearance than the standard models in the same family, so a bracket and hat offset that bolt onto one are not the same parts that fit the other. StopFlex supplies the calipers, pads, rotor hats, floating hardware, and brake lines as a matched system built to your confirmed trim. Cars with modified knuckles, modified uprights, or non-factory suspension mounting points must be reviewed before ordering and are not treated as direct-fit.
This setup uses a 380 mm front rotor, so the minimum wheel size is 19". Wheels under 19" will not clear the caliper and rotor, and spoke profile and offset affect clearance too — confirm your exact wheels before ordering.
| Wheel Size (Standard) | Disc Range |
|---|---|
| 15" | 260 mm – 285 mm |
| 16" | 285 mm – 300 mm |
| 17" | 300 mm – 330 mm |
| 18" | 330 mm – 355 mm |
| 19" | 355 mm – 380 mm |
| 20" | 380 mm – 400 mm |
| 21" | 400 mm – 420 mm |
| 22" | 420 mm – 440 mm |
Caliper Overview — Front & Rear Balance
Front Caliper (Primary Upgrade)
The front axle uses the Genuine Brembo OEM Ford Shelby GT500 Mustang 6-Piston Caliper, a genuine OEM-derived Brembo performance caliper selected for strong clamp distribution and consistent pedal response with the 380 mm rotor. Its fixed 6-piston layout spreads pad pressure across a larger swept area than a typical single-piston sliding caliper, improving heat management and modulation during repeated high-speed stops.
Rear Caliper (Balance)
The rear axle can be configured with Brembo V4 / GT4 / GTS4 4-Piston Caliper Options on a 355 mm rotor: V4 uses a Genuine Brembo OEM Cadillac CTS-V 4-Piston Caliper, GT4 uses a Genuine Brembo GT | M4 4-Piston Caliper, and GTS4 uses a Genuine Brembo GT | S4 4-Piston Caliper. The rear package is engineered to support brake balance and rear-axle stability while preserving factory electronic parking brake function where applicable.
Front & rear, engineered together: The 380 mm front and 355 mm rear carbon-ceramic package is engineered as a complete system so the rear axle contributes properly instead of relying on a front-only brake mismatch. StopFlex matches piston area, rotor diameter, hat offset, and pad selection to the confirmed F40 trim to keep pedal feel, ABS behavior, and brake bias predictable.
Make It Yours — Color & Logo Customization
Every StopFlex kit-upgrade order can be finished with custom caliper colors, a custom caliper logo, and custom rotor hat colors, so the brake package matches your exact build instead of a fixed off-the-shelf look.
- Custom caliper color
- Custom caliper logo
- Custom rotor hat color
Why StopFlex CCB
Lower Unsprung Mass
StopFlex carbon-ceramic rotors are engineered to reduce rotor mass versus comparable iron discs, helping the suspension react cleaner and the steering feel more precise.
High-Temperature Stability
The carbon-silicon-carbide matrix is built for stable braking behavior at temperatures that can push iron rotors into heavy fade.
Rust-Free Rotor Surface
Carbon ceramic does not form orange flash rust after rain, washing, or storage, keeping the visible rotor face cleaner behind open wheels.
Long Street-Service Potential
In normal road use with matched pads and proper bedding, StopFlex CCB rotors are designed for far longer service life than typical iron replacement rotors.
Low Visible Dust
When paired with matched StopFlex pads, the system produces very low visible brake dust compared with conventional iron rotor and pad combinations.
Premium Ceramic-Glaze Appearance
StopFlex's proprietary coating creates a bright, high-end ceramic-glaze finish with subtle glaze texture and a more premium visual character behind open wheels.
Street-Usable Cold Bite
Street Spec and Track-Day Spec rotors are designed for normal first-stop road use, including cold-weather operation. Motorsport Spec is the competition-focused exception.
Continuous Fiber Reinforcement
Long-fiber carbon ceramic construction improves structural strength and thermal durability versus chopped-fiber approaches.
Heat Management Note
Carbon ceramic rotors tolerate extreme surface temperature, but they do not remove every heat-management requirement. During repeated hard stops, heat can still soak into pads, fluid, seals, calipers, wheels, and nearby components. For long track sessions, mountain descents, or sustained aggressive driving, brake cooling and high-temperature fluid are still recommended.
Street / Track-Day / Motorsport Rotor Options
Street Spec
Ceramic coating, cross-drilled face, and large cooling channels.
Best for daily driving and premium street builds that need clean cold bite, low dust, corrosion-free appearance, and long service life.
Track-Day Spec
Ceramic coating, blank face, and honeycomb cooling channels.
Best for fast-road and track-day use where repeated braking stability matters more than maximum visual drilling style.
Motorsport Spec
Uncoated blank face with honeycomb cooling channels.
Best for race-focused builds that run competition pads, high-temperature fluid, cooling strategy, and a proper warm-up window. Not the default street choice.
Package Scope
| Item | Details |
|---|---|
| Front calipers | Genuine Brembo OEM Ford Shelby GT500 Mustang 6-Piston Caliper |
| Front CCB rotors | 380mm |
| Rear calipers | Brembo V4 / GT4 / GTS4 4-Piston Caliper Options |
| Rear CCB rotors | 355mm |
| CCB brake pads | Matched for the supplied StopFlex carbon ceramic rotors |
| Rotor hats and floating hardware | Vehicle-specific hardware package |
| Brake lines | Included for complete kit-upgrade orders |
| Color customization | Custom caliper colors, a custom caliper logo, and custom rotor hat colors are available for every kit-upgrade order. |
| Order scope | Default listing is full-car set when front and rear are specified. Front-only or rear-only orders can be arranged after confirmation. |
| Rear caliper option mapping | V4 = Genuine Brembo OEM Cadillac CTS-V 4-Piston Caliper — 355 mm rotor GT4 = Genuine Brembo GT | M4 4-Piston Caliper — 355 mm rotor GTS4 = Genuine Brembo GT | S4 4-Piston Caliper — 355 mm rotor |
EPB & Rear Caliper Options
This vehicle leaves the factory with an electronic parking brake (EPB) built into the rear brake, so the rear of the kit is built to keep that EPB working. There are two rear paths. The first is a dual-caliper rear: a main performance caliper handles braking while a dedicated EPB actuator caliper is retained alongside it, so the electronic parking brake, auto-hold, and hill-start assist all keep working; on this path the rear performance caliper can be the TTSPORT EP4 / EP4S 4-piston caliper. The second is an EPB-integrated caliper, a single rear caliper with the electromechanical parking-brake motor built in for a cleaner install with fewer parts behind the wheel; on this path the rear is the TTSPORT EP4 / EP4S 4-piston caliper with integrated EPB. Which path fits best depends on your exact trim and EPB configuration, your budget, your appearance preference, and your wheel size and spoke clearance. Confirm your car's rear-brake configuration with StopFlex before ordering so the correct EPB-compatible rear option is built for your kit.
| Rear option | What it is | Rear caliper | Best when |
|---|---|---|---|
| Dual caliper (EPB retained) | Performance caliper plus a dedicated EPB actuator caliper, both fitted on the rear, so the factory electronic parking brake keeps working. | TTSPORT EP4 / EP4S 4-Piston Caliper | You want guaranteed factory EPB, auto-hold, and hill-start behavior preserved. |
| EPB-integrated caliper | A single rear caliper with the electromechanical parking-brake motor built in, for a cleaner install with fewer parts behind the wheel. | TTSPORT EP4 / EP4S 4-Piston Caliper with integrated EPB | You want a cleaner single-caliper rear with full EPB function. |
FAQ
Will this fit my exact 2019-2024 BMW 1 Series F40 trim?
StopFlex does not treat every F40 as the same car. Before production, your exact model, trim, hub, knuckle/upright layout, and wheel specifications are confirmed so the brackets, rotor-hat offsets, and caliper mounts are built for your vehicle rather than assumed from the chassis code.
What wheel size do I need for the 380 mm front rotor?
This kit requires at least 19 inch wheels because the front carbon-ceramic rotor is 380 mm. Wheel diameter alone is not enough; StopFlex also checks barrel shape, spoke clearance, offset, and caliper template clearance for the Genuine Brembo OEM Ford Shelby GT500 Mustang 6-Piston Caliper.
Will the electronic parking brake still work?
The F40 1 Series uses an electronic parking brake on applicable factory configurations, so StopFlex engineers the rear package around EPB retention where the vehicle is equipped with it. EPB compatibility is confirmed during order validation because rear-caliper and actuator details must match the customer’s exact car.
Why choose carbon-ceramic instead of another iron big brake kit?
Carbon-ceramic rotors reduce brake dust, resist heat saturation during repeated hard stops, and remove rotating mass compared with similarly sized iron rotors. On this F40 kit, the 380 mm front and 355 mm rear carbon-ceramic rotors are paired with fixed Brembo calipers to improve thermal capacity without adding unnecessary iron-rotor weight.
Need Fitment Confirmation?
Send the exact vehicle details, current rotor sizes, and caliper type before ordering.
More Contact Information
We’re here to help! Whether you need expert advice on brake setups, have questions about your order, or just want to share feedback, our team is ready to assist you. Reach out via your preferred channel below, or use the inquiry form.
Get in Touch
Business Hours
Monday – Saturday, 9:30 AM – 6:30 PM (GMT +8)
Current Time:
Follow Us
- Choosing a selection results in a full page refresh.