{"product_id":"skoda-octavia-vrs-1z-5e-nx-brembo-v6-gt6-gts6-380mm-ccb-kit","title":"2004-2026+ Skoda Octavia (1Z\/5E\/NX) CCB Big Brake Kit | Brembo GT6 6-Piston","description":"\u003cdiv class=\"sfx\"\u003e\n\u003csection class=\"box red\"\u003e\u003ch2\u003e2004-2026+ Skoda Octavia \/ vRS (1Z\/5E\/NX) CCB Big Brake Kit — Genuine Brembo GT6 Front + Genuine Brembo GT4 Rear Setup\u003c\/h2\u003e\n\u003cp\u003eOctavia and Octavia vRS owners usually reach this kit after tuned-road or track use overwhelms the factory iron brakes, or after repeated dust and heat cycles make open wheels hard to keep clean. This StopFlex package uses 380 mm carbon-ceramic rotors with Brembo V6 \/ GT6 \/ GTS6 6-Piston Caliper Options up front and Brembo V4 \/ GT4 \/ GTS4 4-Piston Caliper Options at the rear for higher thermal capacity, lower rotating mass and a brake package sized for 19 inch and larger wheels. Brackets, rotor-hat offsets, caliper position and line routing are built for the customer's exact 1Z, 5E or NX trim rather than treated as a platform-wide bolt-on.\u003c\/p\u003e\n\u003cul class=\"check\"\u003e\n\u003cli\u003e\u003cspan\u003eThe 380 mm front and rear rotor package is the largest StopFlex Octavia \/ vRS configuration here, so wheels under 19 inches will not clear it and spoke clearance must be checked before ordering.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eFront choices are V6, GT6 or GTS6 genuine Brembo 6-piston calipers, each paired with a 380 mm carbon-ceramic rotor for the Octavia \/ vRS 1Z, 5E or NX application.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eThe 1Z, 5E and NX generations can differ in rear parking-brake hardware and hub\/knuckle geometry, so StopFlex confirms the exact model code and trim before producing hats and brackets.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/section\u003e\u003csection class=\"box red\"\u003e\u003ch2\u003eFitment Hard Lines\u003c\/h2\u003e\n\u003cdiv class=\"scroll\"\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth class=\"accent\"\u003eField\u003c\/th\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003eSkoda Octavia \/ vRS (1Z\/5E\/NX)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel years\u003c\/td\u003e\n\u003ctd\u003e2004-2026+\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFront setup\u003c\/td\u003e\n\u003ctd\u003eBrembo V6 \/ GT6 \/ GTS6 6-Piston Caliper Options \/ 380mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRear setup\u003c\/td\u003e\n\u003ctd\u003eBrembo V4 \/ GT4 \/ GTS4 4-Piston Caliper Options \/ 380mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePage type\u003c\/td\u003e\n\u003ctd\u003eComplete CCB kit upgrade\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum wheel size\u003c\/td\u003e\n\u003ctd\u003e19\" (for the 380 mm front rotor)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cdiv class=\"sf-emph\"\u003e\u003cp\u003eEvery StopFlex kit is bespoke-engineered for your exact model and trim — the brackets, rotor-hat offsets, and caliper mounting are matched to your specific car, not assumed from the platform. This matters because trims that share a chassis name can differ mechanically: a pure M or performance variant often carries different front knuckles\/uprights, hub geometry, and wheel axial (ET) clearance than the standard models in the same family, so a bracket and hat offset that bolt onto one are not the same parts that fit the other. StopFlex supplies the calipers, pads, rotor hats, floating hardware, and brake lines as a matched system built to your confirmed trim. Cars with modified knuckles, modified uprights, or non-factory suspension mounting points must be reviewed before ordering and are not treated as direct-fit.\u003c\/p\u003e\u003c\/div\u003e\n\u003cp\u003eThis setup uses a 380 mm front rotor, so the minimum wheel size is 19\". Wheels under 19\" will not clear the caliper and rotor, and spoke profile and offset affect clearance too — confirm your exact wheels before ordering.\u003c\/p\u003e\n\u003cdiv class=\"scroll\"\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth class=\"accent\"\u003eWheel Size (Standard)\u003c\/th\u003e\n\u003cth\u003eDisc Range\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e15\"\u003c\/td\u003e\n\u003ctd\u003e260 mm – 285 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e16\"\u003c\/td\u003e\n\u003ctd\u003e285 mm – 300 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e17\"\u003c\/td\u003e\n\u003ctd\u003e300 mm – 330 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e18\"\u003c\/td\u003e\n\u003ctd\u003e330 mm – 355 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e19\"\u003c\/td\u003e\n\u003ctd\u003e355 mm – 380 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e20\"\u003c\/td\u003e\n\u003ctd\u003e380 mm – 400 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e21\"\u003c\/td\u003e\n\u003ctd\u003e400 mm – 420 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e22\"\u003c\/td\u003e\n\u003ctd\u003e420 mm – 440 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003c\/section\u003e\u003csection class=\"box\"\u003e\u003ch2\u003eCaliper Overview — Front \u0026amp; Rear Balance\u003c\/h2\u003e\n\u003cdiv class=\"grid g2\"\u003e\n\u003cdiv class=\"card\"\u003e\n\u003ch3\u003eFront Caliper (Primary Upgrade)\u003c\/h3\u003e\n\u003cp\u003eThe front axle uses Brembo V6 \/ GT6 \/ GTS6 6-Piston Caliper Options, giving the Octavia a larger fixed-caliper clamping package than the factory sliding-caliper layouts found on many 1Z and 5E cars. The buyer chooses V6 = Genuine Brembo OEM Cadillac CTS-V 6-Piston Caliper with 380 mm rotor, GT6 = Genuine Brembo GT | M6 6-Piston Caliper with 380 mm rotor, or GTS6 = Genuine Brembo GT | S6 6-Piston Caliper with 380 mm rotor. Each option is a genuine Brembo aluminum performance caliper selected for pad support, stiffness and repeatable pedal response with the StopFlex carbon-ceramic disc.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"card\"\u003e\n\u003ch3\u003eRear Caliper (Balance)\u003c\/h3\u003e\n\u003cp\u003eThe rear axle uses Brembo V4 \/ GT4 \/ GTS4 4-Piston Caliper Options on matching 380 mm carbon-ceramic rotors, so rear torque contribution is engineered with the front system instead of left as a stock-caliper compromise. EPB handling is confirmed per car because later NX Octavia models use an electronic parking brake while earlier 1Z and many 5E cars use a manual handbrake layout.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sf-emph\"\u003e\u003cp\u003e\u003cstrong\u003eFront \u0026amp; rear, engineered together:\u003c\/strong\u003e The 380 mm front and rear package is specified as one brake system so piston area, rotor diameter, pad compound, hat offset and line hardware are matched to the Octavia's axle load and brake-control behavior. That matters on a front-heavy FWD or AWD vRS because an oversized front-only conversion can increase front bias and ABS intervention if the rear is not engineered with it.\u003c\/p\u003e\u003c\/div\u003e\u003c\/section\u003e\u003csection class=\"box\"\u003e\u003ch2\u003eMake It Yours — Color \u0026amp; Logo Customization\u003c\/h2\u003e\n\u003cdiv class=\"sf-emph\"\u003e\n\u003cp\u003eEvery StopFlex kit-upgrade order can be finished with \u003cstrong\u003ecustom caliper colors\u003c\/strong\u003e, a \u003cstrong\u003ecustom caliper logo\u003c\/strong\u003e, and \u003cstrong\u003ecustom rotor hat colors\u003c\/strong\u003e, so the brake package matches your exact build instead of a fixed off-the-shelf look.\u003c\/p\u003e\n\u003cul class=\"check\"\u003e\n\u003cli\u003e\u003cstrong\u003eCustom caliper color\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCustom caliper logo\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCustom rotor hat color\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\u003c\/section\u003e\u003csection class=\"box\"\u003e\u003ch2\u003eWhy StopFlex CCB\u003c\/h2\u003e\n\u003cdiv class=\"grid g3\"\u003e\n\u003cdiv class=\"card\"\u003e\n\u003ch3\u003eLower Unsprung Mass\u003c\/h3\u003e\n\u003cp\u003eStopFlex carbon-ceramic rotors are engineered to reduce rotor mass versus comparable iron discs, helping the suspension react cleaner and the steering feel more precise.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"card\"\u003e\n\u003ch3\u003eHigh-Temperature Stability\u003c\/h3\u003e\n\u003cp\u003eThe carbon-silicon-carbide matrix is built for stable braking behavior at temperatures that can push iron rotors into heavy fade.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"card\"\u003e\n\u003ch3\u003eRust-Free Rotor Surface\u003c\/h3\u003e\n\u003cp\u003eCarbon ceramic does not form orange flash rust after rain, washing, or storage, keeping the visible rotor face cleaner behind open wheels.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"card\"\u003e\n\u003ch3\u003eLong Street-Service Potential\u003c\/h3\u003e\n\u003cp\u003eIn normal road use with matched pads and proper bedding, StopFlex CCB rotors are designed for far longer service life than typical iron replacement rotors.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"card\"\u003e\n\u003ch3\u003eLow Visible Dust\u003c\/h3\u003e\n\u003cp\u003eWhen paired with matched StopFlex pads, the system produces very low visible brake dust compared with conventional iron rotor and pad combinations.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"card\"\u003e\n\u003ch3\u003ePremium Ceramic-Glaze Appearance\u003c\/h3\u003e\n\u003cp\u003eStopFlex's proprietary coating creates a bright, high-end ceramic-glaze finish with subtle glaze texture and a more premium visual character behind open wheels.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"card\"\u003e\n\u003ch3\u003eStreet-Usable Cold Bite\u003c\/h3\u003e\n\u003cp\u003eStreet Spec and Track-Day Spec rotors are designed for normal first-stop road use, including cold-weather operation. Motorsport Spec is the competition-focused exception.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"card\"\u003e\n\u003ch3\u003eContinuous Fiber Reinforcement\u003c\/h3\u003e\n\u003cp\u003eLong-fiber carbon ceramic construction improves structural strength and thermal durability versus chopped-fiber approaches.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003c\/section\u003e\u003csection class=\"box\"\u003e\u003ch2\u003eHeat Management Note\u003c\/h2\u003e\n\u003cp\u003eCarbon ceramic rotors tolerate extreme surface temperature, but they do not remove every heat-management requirement. During repeated hard stops, heat can still soak into pads, fluid, seals, calipers, wheels, and nearby components. For long track sessions, mountain descents, or sustained aggressive driving, brake cooling and high-temperature fluid are still recommended.\u003c\/p\u003e\u003c\/section\u003e\u003csection class=\"box\"\u003e\u003ch2\u003eStreet \/ Track-Day \/ Motorsport Rotor Options\u003c\/h2\u003e\n\u003cdiv class=\"grid g3\"\u003e\n\u003cdiv class=\"card\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/8933\/5811\/files\/StopFlex_Street_CCB_Rotor.jpg?v=1773907551\" alt=\"StopFlex Street Spec carbon ceramic brake rotor\"\u003e\u003ch3\u003eStreet Spec\u003c\/h3\u003e\n\u003cp\u003eCeramic coating, cross-drilled face, and large cooling channels.\u003c\/p\u003e\n\u003cp\u003eBest for daily driving and premium street builds that need clean cold bite, low dust, corrosion-free appearance, and long service life.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"card\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/8933\/5811\/files\/StopFlex_Trackday_CCB_Rotor.jpg?v=1773907551\" alt=\"StopFlex Track-Day Spec carbon ceramic brake rotor\"\u003e\u003ch3\u003eTrack-Day Spec\u003c\/h3\u003e\n\u003cp\u003eCeramic coating, blank face, and honeycomb cooling channels.\u003c\/p\u003e\n\u003cp\u003eBest for fast-road and track-day use where repeated braking stability matters more than maximum visual drilling style.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"card\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/8933\/5811\/files\/StopFlex_Racing_CCB_Rotor.jpg?v=1773907551\" alt=\"StopFlex Motorsport Spec carbon ceramic brake rotor\"\u003e\u003ch3\u003eMotorsport Spec\u003c\/h3\u003e\n\u003cp\u003eUncoated blank face with honeycomb cooling channels.\u003c\/p\u003e\n\u003cp\u003eBest for race-focused builds that run competition pads, high-temperature fluid, cooling strategy, and a proper warm-up window. Not the default street choice.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003c\/section\u003e\u003csection class=\"box\"\u003e\u003ch2\u003ePackage Scope\u003c\/h2\u003e\n\u003cdiv class=\"scroll\"\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth class=\"accent\"\u003eItem\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFront calipers\u003c\/td\u003e\n\u003ctd\u003eBrembo V6 \/ GT6 \/ GTS6 6-Piston Caliper Options\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFront CCB rotors\u003c\/td\u003e\n\u003ctd\u003e380mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRear calipers\u003c\/td\u003e\n\u003ctd\u003eBrembo V4 \/ GT4 \/ GTS4 4-Piston Caliper Options\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRear CCB rotors\u003c\/td\u003e\n\u003ctd\u003e380mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCCB brake pads\u003c\/td\u003e\n\u003ctd\u003eMatched for the supplied StopFlex carbon ceramic rotors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRotor hats and floating hardware\u003c\/td\u003e\n\u003ctd\u003eVehicle-specific hardware package\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrake lines\u003c\/td\u003e\n\u003ctd\u003eIncluded for complete kit-upgrade orders\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor customization\u003c\/td\u003e\n\u003ctd\u003eCustom caliper colors, a custom caliper logo, and custom rotor hat colors are available for every kit-upgrade order.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrder scope\u003c\/td\u003e\n\u003ctd\u003eDefault listing is full-car set when front and rear are specified. Front-only or rear-only orders can be arranged after confirmation.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFront caliper option mapping\u003c\/td\u003e\n\u003ctd\u003eV6 = Genuine Brembo OEM Cadillac CTS-V 6-Piston Caliper — 380 mm rotor\u003cbr\u003eGT6 = Genuine Brembo GT | M6 6-Piston Caliper — 380 mm rotor\u003cbr\u003eGTS6 = Genuine Brembo GT | S6 6-Piston Caliper — 380 mm rotor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRear caliper option mapping\u003c\/td\u003e\n\u003ctd\u003eV4 = Genuine Brembo OEM Cadillac CTS-V 4-Piston Caliper — 380 mm rotor\u003cbr\u003eGT4 = Genuine Brembo GT | M4 4-Piston Caliper — 380 mm rotor\u003cbr\u003eGTS4 = Genuine Brembo GT | S4 4-Piston Caliper — 380 mm rotor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003c\/section\u003e\u003csection class=\"box\"\u003e\u003ch2\u003eEPB \u0026amp; Rear Caliper Options\u003c\/h2\u003e\n\u003cp\u003eThis vehicle leaves the factory with an electronic parking brake (EPB) built into the rear brake, so the rear of the kit is built to keep that EPB working. There are two rear paths. The first is a dual-caliper rear: a main performance caliper handles braking while a dedicated EPB actuator caliper is retained alongside it, so the electronic parking brake, auto-hold, and hill-start assist all keep working; on this path the rear performance caliper can be the TTSPORT EP4 \/ EP4S 4-piston caliper. The second is an EPB-integrated caliper, a single rear caliper with the electromechanical parking-brake motor built in for a cleaner install with fewer parts behind the wheel; on this path the rear is the TTSPORT EP4 \/ EP4S 4-piston caliper with integrated EPB. Which path fits best depends on your exact trim and EPB configuration, your budget, your appearance preference, and your wheel size and spoke clearance. Confirm your car's rear-brake configuration with StopFlex before ordering so the correct EPB-compatible rear option is built for your kit.\u003c\/p\u003e\n\u003cdiv class=\"scroll\"\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth class=\"accent\"\u003eRear option\u003c\/th\u003e\n\u003cth\u003eWhat it is\u003c\/th\u003e\n\u003cth\u003eRear caliper\u003c\/th\u003e\n\u003cth\u003eBest when\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDual caliper (EPB retained)\u003c\/td\u003e\n\u003ctd\u003ePerformance caliper plus a dedicated EPB actuator caliper, both fitted on the rear, so the factory electronic parking brake keeps working.\u003c\/td\u003e\n\u003ctd\u003eTTSPORT EP4 \/ EP4S 4-Piston Caliper\u003c\/td\u003e\n\u003ctd\u003eYou want guaranteed factory EPB, auto-hold, and hill-start behavior preserved.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEPB-integrated caliper\u003c\/td\u003e\n\u003ctd\u003eA single rear caliper with the electromechanical parking-brake motor built in, for a cleaner install with fewer parts behind the wheel.\u003c\/td\u003e\n\u003ctd\u003eTTSPORT EP4 \/ EP4S 4-Piston Caliper with integrated EPB\u003c\/td\u003e\n\u003ctd\u003eYou want a cleaner single-caliper rear with full EPB function.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003c\/section\u003e\u003csection class=\"box\"\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cdiv class=\"faq\"\u003e\n\u003cdetails\u003e\u003csummary\u003eWill this 380 mm kit fit my exact Octavia or Octavia vRS trim?\u003c\/summary\u003e\u003cdiv class=\"a\"\u003e\u003cp\u003eFitment is built only after your exact 1Z, 5E or NX model, trim, hub, knuckle\/upright, rear parking-brake type and wheel data are confirmed. StopFlex does not treat every Octavia or MQB-based car as the same bracket and rotor-hat offset.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat wheel size do I need for the 380 mm carbon-ceramic rotors?\u003c\/summary\u003e\u003cdiv class=\"a\"\u003e\u003cp\u003eThe minimum wheel diameter is 19 inches because this kit uses 380 mm rotors front and rear. Inner barrel and spoke clearance still have to be checked against the selected Brembo V6, GT6, GTS6, V4, GT4 or GTS4 caliper shape.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWill the electronic parking brake still work on NX Octavia models?\u003c\/summary\u003e\u003cdiv class=\"a\"\u003e\u003cp\u003eNX\/Mk4 cars with factory EPB require the rear package to be engineered around that parking-brake configuration. StopFlex confirms the VIN\/trim and rear hardware before specifying the rear caliper solution, lines and mounting parts.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhy switch from the factory iron brakes to carbon ceramic on an Octavia vRS?\u003c\/summary\u003e\u003cdiv class=\"a\"\u003e\u003cp\u003eThe main reasons are heat stability during repeated high-speed stops, lower brake dust on open wheels, reduced rotating mass and longer service life in road use when the pads and discs are kept in their intended temperature range. The 380 mm Brembo-based setup also gives the car a larger pad and rotor package for tuned road or track-day use.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\n\u003c\/div\u003e\u003c\/section\u003e\u003csection class=\"cta\" id=\"contact_form_page\"\u003e\u003ch2\u003eNeed Fitment Confirmation?\u003c\/h2\u003e\n\u003cp\u003eSend the exact vehicle details, current rotor sizes, and caliper type before ordering.\u003c\/p\u003e\n\u003cdiv class=\"cta-row\"\u003e\n\u003ca class=\"btn\" href=\"\/pages\/carbon-ceramic-brakes\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eCarbon Ceramic Brakes: Buying \u0026amp; Fitment Guide\u003c\/a\u003e\u003ca class=\"btn ghost\" href=\"#contact_form_page\"\u003eConfirm Fitment\u003c\/a\u003e\n\u003c\/div\u003e\u003c\/section\u003e\n\u003c\/div\u003e","brand":"StopFlex","offers":[{"title":"Default Title","offer_id":48333599506691,"sku":"100617","price":5000.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0761\/8933\/5811\/files\/Product_Genuine_Brembo_GT_S6_6-Piston_Caliper_3341c983-3ea4-45ae-a2b5-9cdbb97f8fae.png?v=1780915286","url":"https:\/\/stopflex-ccb.com\/products\/skoda-octavia-vrs-1z-5e-nx-brembo-v6-gt6-gts6-380mm-ccb-kit","provider":"StopFlex","version":"1.0","type":"link"}