{"product_id":"porsche-911-997-sport-classic-speedster-porsche-gt3-405mm-ccb-kit","title":"2010-2011 Porsche 911 Sport Classic (997) CCB Big Brake Kit | Brembo OEM Porsche 911 GT3 6-Piston","description":"\u003cdiv class=\"sfx\"\u003e\n\u003csection class=\"box red\"\u003e\u003ch2\u003e2010-2011 Porsche 911 (997) Sport Classic \/ Speedster CCB Big Brake Kit — Genuine Brembo OEM Porsche 911 GT3 6-Piston Caliper Front + Genuine Brembo OEM Porsche 911 GT3 4-Piston Caliper Rear Setup\u003c\/h2\u003e\n\u003cp\u003eThe 2010-2011 997 Sport Classic and Speedster owner is usually solving one of three problems: iron-rotor dust on open wheels, brake heat on fast road or track use, or the cost of replacing factory carbon-ceramic components. This StopFlex kit pairs a 405mm front carbon-ceramic rotor with a Genuine Brembo OEM Porsche 911 GT3 6-Piston Caliper and a 390mm rear carbon-ceramic rotor with a Genuine Brembo OEM Porsche 911 GT3 4-Piston Caliper for higher heat capacity, lower rotating mass, and matched brake balance. Each kit is built to the confirmed Sport Classic or Speedster trim, including the correct brackets, rotor-hat offsets, caliper mounting, lines, pads, hats, and hardware.\u003c\/p\u003e\n\u003cul class=\"check\"\u003e\n\u003cli\u003e\u003cspan\u003e405mm front rotors require 21-inch or larger wheels; wheels under 21 inches will not clear the rotor package, and spoke clearance must also be checked.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eThe front axle uses the Genuine Brembo OEM Porsche 911 GT3 6-Piston Caliper with carbon-ceramic rotors, pads, hats, hardware, and lines matched to the 997 Sport Classic \/ Speedster order.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePorsche pad-wear sensors are retained, so the factory pad-wear warning system continues to operate without dashboard errors when the kit is installed correctly.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/section\u003e\u003csection class=\"box red\"\u003e\u003ch2\u003eFitment Hard Lines\u003c\/h2\u003e\n\u003cdiv class=\"scroll\"\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth class=\"accent\"\u003eField\u003c\/th\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003ePorsche 911 (997) Sport Classic \/ Speedster\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel years\u003c\/td\u003e\n\u003ctd\u003e2010-2011\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFront setup\u003c\/td\u003e\n\u003ctd\u003eGenuine Brembo OEM Porsche 911 GT3 6-Piston Caliper \/ 405mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRear setup\u003c\/td\u003e\n\u003ctd\u003eGenuine Brembo OEM Porsche 911 GT3 4-Piston Caliper \/ 390mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePage type\u003c\/td\u003e\n\u003ctd\u003eComplete CCB kit upgrade\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum wheel size\u003c\/td\u003e\n\u003ctd\u003e21\" (for the 405 mm front rotor)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cdiv class=\"sf-emph\"\u003e\u003cp\u003eEvery StopFlex kit is bespoke-engineered for your exact model and trim — the brackets, rotor-hat offsets, and caliper mounting are matched to your specific car, not assumed from the platform. This matters because trims that share a chassis name can differ mechanically: a pure M or performance variant often carries different front knuckles\/uprights, hub geometry, and wheel axial (ET) clearance than the standard models in the same family, so a bracket and hat offset that bolt onto one are not the same parts that fit the other. StopFlex supplies the calipers, pads, rotor hats, floating hardware, and brake lines as a matched system built to your confirmed trim. Cars with modified knuckles, modified uprights, or non-factory suspension mounting points must be reviewed before ordering and are not treated as direct-fit.\u003c\/p\u003e\u003c\/div\u003e\n\u003cp\u003eThis setup uses a 405 mm front rotor, so the minimum wheel size is 21\". Wheels under 21\" will not clear the caliper and rotor, and spoke profile and offset affect clearance too — confirm your exact wheels before ordering.\u003c\/p\u003e\n\u003cdiv class=\"scroll\"\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth class=\"accent\"\u003eWheel Size (Standard)\u003c\/th\u003e\n\u003cth\u003eDisc Range\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e15\"\u003c\/td\u003e\n\u003ctd\u003e260 mm – 285 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e16\"\u003c\/td\u003e\n\u003ctd\u003e285 mm – 300 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e17\"\u003c\/td\u003e\n\u003ctd\u003e300 mm – 330 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e18\"\u003c\/td\u003e\n\u003ctd\u003e330 mm – 355 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e19\"\u003c\/td\u003e\n\u003ctd\u003e355 mm – 380 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e20\"\u003c\/td\u003e\n\u003ctd\u003e380 mm – 400 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e21\"\u003c\/td\u003e\n\u003ctd\u003e400 mm – 420 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e22\"\u003c\/td\u003e\n\u003ctd\u003e420 mm – 440 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003c\/section\u003e\u003csection class=\"box\"\u003e\u003ch2\u003eCaliper Overview — Front \u0026amp; Rear Balance\u003c\/h2\u003e\n\u003cdiv class=\"grid g2\"\u003e\n\u003cdiv class=\"card\"\u003e\n\u003ch3\u003eFront Caliper (Primary Upgrade)\u003c\/h3\u003e\n\u003cp\u003eThe front brake package uses the Genuine Brembo OEM Porsche 911 GT3 6-Piston Caliper, giving the 405mm carbon-ceramic rotor a wide, stable clamp area and firm pedal response under repeated high-energy stops. Its value on this 997 application is that it is an OEM-derived Brembo Porsche GT3 caliper, not a generic aftermarket body adapted by name only. StopFlex matches its mounting position, hat offset, pads, lines, and hardware to the confirmed Sport Classic or Speedster configuration.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"card\"\u003e\n\u003ch3\u003eRear Caliper (Balance)\u003c\/h3\u003e\n\u003cp\u003eThe rear uses the Genuine Brembo OEM Porsche 911 GT3 4-Piston Caliper with a 390mm carbon-ceramic rotor to keep rear braking contribution aligned with the larger 405mm front package. This prevents the common front-only upgrade problem of excessive front bias and unstable pedal balance under trail braking or repeated high-speed stops.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sf-emph\"\u003e\u003cp\u003e\u003cstrong\u003eFront \u0026amp; rear, engineered together:\u003c\/strong\u003e The 405mm front and 390mm rear carbon-ceramic assemblies are engineered as one brake system, so piston layout, rotor diameter, pad choice, hat offset, and hydraulic behavior are considered together. A full matched kit is the correct approach for a limited-production 997 because front-only hardware can change bias, ABS behavior, and pedal feel without solving rear heat capacity.\u003c\/p\u003e\u003c\/div\u003e\u003c\/section\u003e\u003csection class=\"box\"\u003e\u003ch2\u003eMake It Yours — Color \u0026amp; Logo Customization\u003c\/h2\u003e\n\u003cdiv class=\"sf-emph\"\u003e\n\u003cp\u003eEvery StopFlex kit-upgrade order can be finished with \u003cstrong\u003ecustom caliper colors\u003c\/strong\u003e, a \u003cstrong\u003ecustom caliper logo\u003c\/strong\u003e, and \u003cstrong\u003ecustom rotor hat colors\u003c\/strong\u003e, so the brake package matches your exact build instead of a fixed off-the-shelf look.\u003c\/p\u003e\n\u003cul class=\"check\"\u003e\n\u003cli\u003e\u003cstrong\u003eCustom caliper color\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCustom caliper logo\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCustom rotor hat color\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\u003c\/section\u003e\u003csection class=\"box\"\u003e\u003ch2\u003eWhy StopFlex CCB\u003c\/h2\u003e\n\u003cdiv class=\"grid g3\"\u003e\n\u003cdiv class=\"card\"\u003e\n\u003ch3\u003eLower Unsprung Mass\u003c\/h3\u003e\n\u003cp\u003eStopFlex carbon-ceramic rotors are engineered to reduce rotor mass versus comparable iron discs, helping the suspension react cleaner and the steering feel more precise.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"card\"\u003e\n\u003ch3\u003eHigh-Temperature Stability\u003c\/h3\u003e\n\u003cp\u003eThe carbon-silicon-carbide matrix is built for stable braking behavior at temperatures that can push iron rotors into heavy fade.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"card\"\u003e\n\u003ch3\u003eRust-Free Rotor Surface\u003c\/h3\u003e\n\u003cp\u003eCarbon ceramic does not form orange flash rust after rain, washing, or storage, keeping the visible rotor face cleaner behind open wheels.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"card\"\u003e\n\u003ch3\u003eLong Street-Service Potential\u003c\/h3\u003e\n\u003cp\u003eIn normal road use with matched pads and proper bedding, StopFlex CCB rotors are designed for far longer service life than typical iron replacement rotors.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"card\"\u003e\n\u003ch3\u003eLow Visible Dust\u003c\/h3\u003e\n\u003cp\u003eWhen paired with matched StopFlex pads, the system produces very low visible brake dust compared with conventional iron rotor and pad combinations.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"card\"\u003e\n\u003ch3\u003ePremium Ceramic-Glaze Appearance\u003c\/h3\u003e\n\u003cp\u003eStopFlex's proprietary coating creates a bright, high-end ceramic-glaze finish with subtle glaze texture and a more premium visual character behind open wheels.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"card\"\u003e\n\u003ch3\u003eStreet-Usable Cold Bite\u003c\/h3\u003e\n\u003cp\u003eStreet Spec and Track-Day Spec rotors are designed for normal first-stop road use, including cold-weather operation. Motorsport Spec is the competition-focused exception.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"card\"\u003e\n\u003ch3\u003eContinuous Fiber Reinforcement\u003c\/h3\u003e\n\u003cp\u003eLong-fiber carbon ceramic construction improves structural strength and thermal durability versus chopped-fiber approaches.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003c\/section\u003e\u003csection class=\"box\"\u003e\u003ch2\u003eHeat Management Note\u003c\/h2\u003e\n\u003cp\u003eCarbon ceramic rotors tolerate extreme surface temperature, but they do not remove every heat-management requirement. During repeated hard stops, heat can still soak into pads, fluid, seals, calipers, wheels, and nearby components. For long track sessions, mountain descents, or sustained aggressive driving, brake cooling and high-temperature fluid are still recommended.\u003c\/p\u003e\u003c\/section\u003e\u003csection class=\"box\"\u003e\u003ch2\u003eStreet \/ Track-Day \/ Motorsport Rotor Options\u003c\/h2\u003e\n\u003cdiv class=\"grid g3\"\u003e\n\u003cdiv class=\"card\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/8933\/5811\/files\/StopFlex_Street_CCB_Rotor.jpg?v=1773907551\" alt=\"StopFlex Street Spec carbon ceramic brake rotor\"\u003e\u003ch3\u003eStreet Spec\u003c\/h3\u003e\n\u003cp\u003eCeramic coating, cross-drilled face, and large cooling channels.\u003c\/p\u003e\n\u003cp\u003eBest for daily driving and premium street builds that need clean cold bite, low dust, corrosion-free appearance, and long service life.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"card\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/8933\/5811\/files\/StopFlex_Trackday_CCB_Rotor.jpg?v=1773907551\" alt=\"StopFlex Track-Day Spec carbon ceramic brake rotor\"\u003e\u003ch3\u003eTrack-Day Spec\u003c\/h3\u003e\n\u003cp\u003eCeramic coating, blank face, and honeycomb cooling channels.\u003c\/p\u003e\n\u003cp\u003eBest for fast-road and track-day use where repeated braking stability matters more than maximum visual drilling style.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"card\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/8933\/5811\/files\/StopFlex_Racing_CCB_Rotor.jpg?v=1773907551\" alt=\"StopFlex Motorsport Spec carbon ceramic brake rotor\"\u003e\u003ch3\u003eMotorsport Spec\u003c\/h3\u003e\n\u003cp\u003eUncoated blank face with honeycomb cooling channels.\u003c\/p\u003e\n\u003cp\u003eBest for race-focused builds that run competition pads, high-temperature fluid, cooling strategy, and a proper warm-up window. Not the default street choice.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003c\/section\u003e\u003csection class=\"box\"\u003e\u003ch2\u003ePackage Scope\u003c\/h2\u003e\n\u003cdiv class=\"scroll\"\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth class=\"accent\"\u003eItem\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFront calipers\u003c\/td\u003e\n\u003ctd\u003eGenuine Brembo OEM Porsche 911 GT3 6-Piston Caliper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFront CCB rotors\u003c\/td\u003e\n\u003ctd\u003e405mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRear calipers\u003c\/td\u003e\n\u003ctd\u003eGenuine Brembo OEM Porsche 911 GT3 4-Piston Caliper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRear CCB rotors\u003c\/td\u003e\n\u003ctd\u003e390mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCCB brake pads\u003c\/td\u003e\n\u003ctd\u003eMatched for the supplied StopFlex carbon ceramic rotors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrake pad wear sensors\u003c\/td\u003e\n\u003ctd\u003eIncluded; 100% compatible with the OEM wear-sensor system.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRotor hats and floating hardware\u003c\/td\u003e\n\u003ctd\u003eVehicle-specific hardware package\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrake lines\u003c\/td\u003e\n\u003ctd\u003eIncluded for complete kit-upgrade orders\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor customization\u003c\/td\u003e\n\u003ctd\u003eCustom caliper colors, a custom caliper logo, and custom rotor hat colors are available for every kit-upgrade order.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrder scope\u003c\/td\u003e\n\u003ctd\u003eDefault listing is full-car set when front and rear are specified. Front-only or rear-only orders can be arranged after confirmation.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003c\/section\u003e\u003csection class=\"box\"\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cdiv class=\"faq\"\u003e\n\u003cdetails\u003e\u003csummary\u003eWill this kit fit my exact 997 Sport Classic or Speedster?\u003c\/summary\u003e\u003cdiv class=\"a\"\u003e\u003cp\u003eFitment is confirmed per car before production. StopFlex does not treat every 997 as the same platform; the brackets, rotor-hat offsets, caliper mounting, brake lines, and hardware are matched to the verified 2010-2011 Sport Classic or Speedster trim and wheel setup.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat wheel size is required for the 405mm front rotor?\u003c\/summary\u003e\u003cdiv class=\"a\"\u003e\u003cp\u003eThe 405mm front rotor requires 21-inch or larger wheels. Wheels under 21 inches will not clear this package, and spoke clearance must also be checked because the Genuine Brembo OEM Porsche 911 GT3 6-Piston Caliper needs lateral room behind the wheel face.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWill the factory Porsche brake pad wear warning still work?\u003c\/summary\u003e\u003cdiv class=\"a\"\u003e\u003cp\u003eYes. This kit is built to remain 100% compatible with the OEM Porsche pad-wear sensor system, so the factory brake-pad warning function continues to work without dashboard errors when the sensors are installed correctly.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eDoes this rear kit need electronic parking brake support?\u003c\/summary\u003e\u003cdiv class=\"a\"\u003e\u003cp\u003eNo. The 2010-2011 997 Sport Classic and Speedster use a manual cable parking brake, not an electronic parking brake. The rear brake package is engineered around the 390mm carbon-ceramic rotor and Genuine Brembo OEM Porsche 911 GT3 4-Piston Caliper, while parking-brake compatibility is handled for the confirmed car.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\n\u003c\/div\u003e\u003c\/section\u003e\u003csection class=\"cta\" id=\"contact_form_page\"\u003e\u003ch2\u003eNeed Fitment Confirmation?\u003c\/h2\u003e\n\u003cp\u003eSend the exact vehicle details, current rotor sizes, and caliper type before ordering.\u003c\/p\u003e\n\u003cdiv class=\"cta-row\"\u003e\n\u003ca class=\"btn\" href=\"\/pages\/carbon-ceramic-brakes\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eCarbon Ceramic Brakes: Buying \u0026amp; Fitment Guide\u003c\/a\u003e\u003ca class=\"btn ghost\" href=\"#contact_form_page\"\u003eConfirm Fitment\u003c\/a\u003e\n\u003c\/div\u003e\u003c\/section\u003e\n\u003c\/div\u003e","brand":"StopFlex","offers":[{"title":"Default Title","offer_id":48333598097667,"sku":"100582","price":5000.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0761\/8933\/5811\/files\/Product_Genuine_Brembo_OEM_Porsche_911_GT3_6-Piston_Caliper_1ffc4574-004c-4a80-8434-0052c02ef4a3.png?v=1780915110","url":"https:\/\/stopflex-ccb.com\/products\/porsche-911-997-sport-classic-speedster-porsche-gt3-405mm-ccb-kit","provider":"StopFlex","version":"1.0","type":"link"}