{"product_id":"bmw-1-series-1m-coup-e82-alcon-rc6-380mm-ccb-kit","title":"2008-2013 BMW 1 Series \/ 1M Coupé (E82) CCB Big Brake Kit | Alcon RC6 6-Piston","description":"\u003cdiv class=\"sfx\"\u003e\n\u003csection class=\"box red\"\u003e\u003ch2\u003e2008-2013 BMW 1 Series \/ 1M Coupé (E82) CCB Big Brake Kit — Genuine Alcon RC6 6-Piston Caliper Front + Genuine Alcon RC4 4-Piston Caliper Rear Setup\u003c\/h2\u003e\n\u003cp\u003eThe 2008-2013 BMW E82 1 Series and 1M Coupé are often upgraded when repeated hard braking exposes the limits of smaller iron rotors: heat saturation, pedal fade, dust, and front-end weight. This StopFlex kit uses 380mm carbon-ceramic rotors with a Genuine Alcon RC6 6-Piston Caliper in front and a Genuine Alcon RC4 4-Piston Caliper with 380mm rear rotors to add thermal capacity while reducing rotating mass and brake dust. Fitment is engineered to the confirmed E82 trim, because a 1M Coupé and a standard 1 Series Coupé can differ in knuckle, hub, offset, and wheel-clearance requirements.\u003c\/p\u003e\n\u003cul class=\"check\"\u003e\n\u003cli\u003e\u003cspan\u003e380mm front and 380mm rear carbon-ceramic rotors require 19-inch or larger wheels on the E82; spoke profile and wheel ET still must be checked before build approval.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eThe front axle uses the exact Genuine Alcon RC6 6-Piston Caliper, matched to the E82 rotor hat and bracket geometry instead of assuming one bracket fits every 1 Series \/ 1M variant.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eThe rear axle uses a Genuine Alcon RC4 4-Piston Caliper with a 380mm carbon-ceramic rotor so the car is engineered as a full front\/rear braking system, not a front-only track compromise.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/section\u003e\u003csection class=\"box red\"\u003e\u003ch2\u003eFitment Hard Lines\u003c\/h2\u003e\n\u003cdiv class=\"scroll\"\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth class=\"accent\"\u003eField\u003c\/th\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003eBMW 1 Series \/ 1M Coupé (E82)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel years\u003c\/td\u003e\n\u003ctd\u003e2008-2013\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFront setup\u003c\/td\u003e\n\u003ctd\u003eGenuine Alcon RC6 6-Piston Caliper \/ 380mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRear setup\u003c\/td\u003e\n\u003ctd\u003eGenuine Alcon RC4 4-Piston Caliper \/ 380mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePage type\u003c\/td\u003e\n\u003ctd\u003eComplete CCB kit upgrade\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum wheel size\u003c\/td\u003e\n\u003ctd\u003e19\" (for the 380 mm front rotor)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cdiv class=\"sf-emph\"\u003e\u003cp\u003eEvery StopFlex kit is bespoke-engineered for your exact model and trim — the brackets, rotor-hat offsets, and caliper mounting are matched to your specific car, not assumed from the platform. This matters because trims that share a chassis name can differ mechanically: a pure M or performance variant often carries different front knuckles\/uprights, hub geometry, and wheel axial (ET) clearance than the standard models in the same family, so a bracket and hat offset that bolt onto one are not the same parts that fit the other. StopFlex supplies the calipers, pads, rotor hats, floating hardware, and brake lines as a matched system built to your confirmed trim. Cars with modified knuckles, modified uprights, or non-factory suspension mounting points must be reviewed before ordering and are not treated as direct-fit.\u003c\/p\u003e\u003c\/div\u003e\n\u003cp\u003eThis setup uses a 380 mm front rotor, so the minimum wheel size is 19\". Wheels under 19\" will not clear the caliper and rotor, and spoke profile and offset affect clearance too — confirm your exact wheels before ordering.\u003c\/p\u003e\n\u003cdiv class=\"scroll\"\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth class=\"accent\"\u003eWheel Size (Standard)\u003c\/th\u003e\n\u003cth\u003eDisc Range\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e15\"\u003c\/td\u003e\n\u003ctd\u003e260 mm – 285 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e16\"\u003c\/td\u003e\n\u003ctd\u003e285 mm – 300 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e17\"\u003c\/td\u003e\n\u003ctd\u003e300 mm – 330 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e18\"\u003c\/td\u003e\n\u003ctd\u003e330 mm – 355 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e19\"\u003c\/td\u003e\n\u003ctd\u003e355 mm – 380 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e20\"\u003c\/td\u003e\n\u003ctd\u003e380 mm – 400 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e21\"\u003c\/td\u003e\n\u003ctd\u003e400 mm – 420 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e22\"\u003c\/td\u003e\n\u003ctd\u003e420 mm – 440 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003c\/section\u003e\u003csection class=\"box\"\u003e\u003ch2\u003eCaliper Overview — Front \u0026amp; Rear Balance\u003c\/h2\u003e\n\u003cdiv class=\"grid g2\"\u003e\n\u003cdiv class=\"card\"\u003e\n\u003ch3\u003eFront Caliper (Primary Upgrade)\u003c\/h3\u003e\n\u003cp\u003eThe front axle is built around the Genuine Alcon RC6 6-Piston Caliper, giving the E82 a larger, stiffer multi-piston clamp package than the factory sliding or smaller fixed-caliper setups found across the 1 Series range. Alcon is a recognized performance-brake manufacturer, and this genuine caliper is used here as the primary heat and torque-control upgrade with carbon-ceramic 380mm rotors. StopFlex matches the caliper mounting and rotor-hat offset to the buyer's exact E82 trim rather than treating the 128i, 135i, 135is, and 1M Coupé as identical.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"card\"\u003e\n\u003ch3\u003eRear Caliper (Balance)\u003c\/h3\u003e\n\u003cp\u003eThe rear axle uses the Genuine Alcon RC4 4-Piston Caliper with a 380mm carbon-ceramic rotor to keep rear brake torque, pad area, and thermal capacity in step with the front RC6 conversion. This E82 chassis uses a manual cable parking brake rather than a factory EPB, so there is no electronic parking-brake motor to retain.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sf-emph\"\u003e\u003cp\u003e\u003cstrong\u003eFront \u0026amp; rear, engineered together:\u003c\/strong\u003e The front RC6 and rear RC4 package is engineered as a matched system so brake torque distribution, rotor thermal capacity, and pedal response are not set by a front-only upgrade with an under-capacity rear axle. StopFlex confirms the exact trim and wheel package before specifying brackets, hat offsets, line routing, and hardware.\u003c\/p\u003e\u003c\/div\u003e\u003c\/section\u003e\u003csection class=\"box\"\u003e\u003ch2\u003eMake It Yours — Color \u0026amp; Logo Customization\u003c\/h2\u003e\n\u003cdiv class=\"sf-emph\"\u003e\n\u003cp\u003eEvery StopFlex kit-upgrade order can be finished with \u003cstrong\u003ecustom caliper colors\u003c\/strong\u003e, a \u003cstrong\u003ecustom caliper logo\u003c\/strong\u003e, and \u003cstrong\u003ecustom rotor hat colors\u003c\/strong\u003e, so the brake package matches your exact build instead of a fixed off-the-shelf look.\u003c\/p\u003e\n\u003cul class=\"check\"\u003e\n\u003cli\u003e\u003cstrong\u003eCustom caliper color\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCustom caliper logo\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCustom rotor hat color\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\u003c\/section\u003e\u003csection class=\"box\"\u003e\u003ch2\u003eWhy StopFlex CCB\u003c\/h2\u003e\n\u003cdiv class=\"grid g3\"\u003e\n\u003cdiv class=\"card\"\u003e\n\u003ch3\u003eLower Unsprung Mass\u003c\/h3\u003e\n\u003cp\u003eStopFlex carbon-ceramic rotors are engineered to reduce rotor mass versus comparable iron discs, helping the suspension react cleaner and the steering feel more precise.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"card\"\u003e\n\u003ch3\u003eHigh-Temperature Stability\u003c\/h3\u003e\n\u003cp\u003eThe carbon-silicon-carbide matrix is built for stable braking behavior at temperatures that can push iron rotors into heavy fade.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"card\"\u003e\n\u003ch3\u003eRust-Free Rotor Surface\u003c\/h3\u003e\n\u003cp\u003eCarbon ceramic does not form orange flash rust after rain, washing, or storage, keeping the visible rotor face cleaner behind open wheels.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"card\"\u003e\n\u003ch3\u003eLong Street-Service Potential\u003c\/h3\u003e\n\u003cp\u003eIn normal road use with matched pads and proper bedding, StopFlex CCB rotors are designed for far longer service life than typical iron replacement rotors.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"card\"\u003e\n\u003ch3\u003eLow Visible Dust\u003c\/h3\u003e\n\u003cp\u003eWhen paired with matched StopFlex pads, the system produces very low visible brake dust compared with conventional iron rotor and pad combinations.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"card\"\u003e\n\u003ch3\u003ePremium Ceramic-Glaze Appearance\u003c\/h3\u003e\n\u003cp\u003eStopFlex's proprietary coating creates a bright, high-end ceramic-glaze finish with subtle glaze texture and a more premium visual character behind open wheels.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"card\"\u003e\n\u003ch3\u003eStreet-Usable Cold Bite\u003c\/h3\u003e\n\u003cp\u003eStreet Spec and Track-Day Spec rotors are designed for normal first-stop road use, including cold-weather operation. Motorsport Spec is the competition-focused exception.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"card\"\u003e\n\u003ch3\u003eContinuous Fiber Reinforcement\u003c\/h3\u003e\n\u003cp\u003eLong-fiber carbon ceramic construction improves structural strength and thermal durability versus chopped-fiber approaches.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003c\/section\u003e\u003csection class=\"box\"\u003e\u003ch2\u003eHeat Management Note\u003c\/h2\u003e\n\u003cp\u003eCarbon ceramic rotors tolerate extreme surface temperature, but they do not remove every heat-management requirement. During repeated hard stops, heat can still soak into pads, fluid, seals, calipers, wheels, and nearby components. For long track sessions, mountain descents, or sustained aggressive driving, brake cooling and high-temperature fluid are still recommended.\u003c\/p\u003e\u003c\/section\u003e\u003csection class=\"box\"\u003e\u003ch2\u003eStreet \/ Track-Day \/ Motorsport Rotor Options\u003c\/h2\u003e\n\u003cdiv class=\"grid g3\"\u003e\n\u003cdiv class=\"card\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/8933\/5811\/files\/StopFlex_Street_CCB_Rotor.jpg?v=1773907551\" alt=\"StopFlex Street Spec carbon ceramic brake rotor\"\u003e\u003ch3\u003eStreet Spec\u003c\/h3\u003e\n\u003cp\u003eCeramic coating, cross-drilled face, and large cooling channels.\u003c\/p\u003e\n\u003cp\u003eBest for daily driving and premium street builds that need clean cold bite, low dust, corrosion-free appearance, and long service life.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"card\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/8933\/5811\/files\/StopFlex_Trackday_CCB_Rotor.jpg?v=1773907551\" alt=\"StopFlex Track-Day Spec carbon ceramic brake rotor\"\u003e\u003ch3\u003eTrack-Day Spec\u003c\/h3\u003e\n\u003cp\u003eCeramic coating, blank face, and honeycomb cooling channels.\u003c\/p\u003e\n\u003cp\u003eBest for fast-road and track-day use where repeated braking stability matters more than maximum visual drilling style.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"card\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/8933\/5811\/files\/StopFlex_Racing_CCB_Rotor.jpg?v=1773907551\" alt=\"StopFlex Motorsport Spec carbon ceramic brake rotor\"\u003e\u003ch3\u003eMotorsport Spec\u003c\/h3\u003e\n\u003cp\u003eUncoated blank face with honeycomb cooling channels.\u003c\/p\u003e\n\u003cp\u003eBest for race-focused builds that run competition pads, high-temperature fluid, cooling strategy, and a proper warm-up window. Not the default street choice.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003c\/section\u003e\u003csection class=\"box\"\u003e\u003ch2\u003ePackage Scope\u003c\/h2\u003e\n\u003cdiv class=\"scroll\"\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth class=\"accent\"\u003eItem\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFront calipers\u003c\/td\u003e\n\u003ctd\u003eGenuine Alcon RC6 6-Piston Caliper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFront CCB rotors\u003c\/td\u003e\n\u003ctd\u003e380mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRear calipers\u003c\/td\u003e\n\u003ctd\u003eGenuine Alcon RC4 4-Piston Caliper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRear CCB rotors\u003c\/td\u003e\n\u003ctd\u003e380mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCCB brake pads\u003c\/td\u003e\n\u003ctd\u003eMatched for the supplied StopFlex carbon ceramic rotors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRotor hats and floating hardware\u003c\/td\u003e\n\u003ctd\u003eVehicle-specific hardware package\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrake lines\u003c\/td\u003e\n\u003ctd\u003eIncluded for complete kit-upgrade orders\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor customization\u003c\/td\u003e\n\u003ctd\u003eCustom caliper colors, a custom caliper logo, and custom rotor hat colors are available for every kit-upgrade order.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrder scope\u003c\/td\u003e\n\u003ctd\u003eDefault listing is full-car set when front and rear are specified. Front-only or rear-only orders can be arranged after confirmation.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003c\/section\u003e\u003csection class=\"box\"\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cdiv class=\"faq\"\u003e\n\u003cdetails\u003e\u003csummary\u003eWill this kit fit my exact E82 trim?\u003c\/summary\u003e\u003cdiv class=\"a\"\u003e\u003cp\u003eFitment is bespoke per confirmed vehicle, not platform-wide. StopFlex checks whether the car is a 128i, 135i, 135is, 1M Coupé, or other E82 variant, then engineers the brackets, rotor-hat offsets, caliper mounting, lines, and hardware for that exact trim and wheel package.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat wheel size is required for the 380mm setup?\u003c\/summary\u003e\u003cdiv class=\"a\"\u003e\u003cp\u003eThis kit uses 380mm front and 380mm rear rotors, so 19-inch wheels are the minimum. Wheel diameter alone is not enough; spoke shape, barrel profile, offset, and spacer use must be verified against the Genuine Alcon RC6 front caliper and RC4 rear caliper.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eDoes the kit retain the electronic parking brake?\u003c\/summary\u003e\u003cdiv class=\"a\"\u003e\u003cp\u003eThe E82 1 Series \/ 1M Coupé does not have a factory electronic parking brake. It uses a manual cable-operated parking brake system, so there is no EPB motor or auto-hold rear caliper function to integrate.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhy choose carbon-ceramic rotors on an E82 instead of iron rotors?\u003c\/summary\u003e\u003cdiv class=\"a\"\u003e\u003cp\u003eCarbon-ceramic rotors reduce brake dust and rotating mass while adding heat capacity for repeated high-speed stops. On a compact, front-heavy turbo or M E82 used on fast road, canyon, or track days, the benefit is more consistent braking and less iron-rotor maintenance when the system is properly sized and warmed.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\n\u003c\/div\u003e\u003c\/section\u003e\u003csection class=\"cta\" id=\"contact_form_page\"\u003e\u003ch2\u003eNeed Fitment Confirmation?\u003c\/h2\u003e\n\u003cp\u003eSend the exact vehicle details, current rotor sizes, and caliper type before ordering.\u003c\/p\u003e\n\u003cdiv class=\"cta-row\"\u003e\n\u003ca class=\"btn\" href=\"\/pages\/carbon-ceramic-brakes\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eCarbon Ceramic Brakes: Buying \u0026amp; Fitment Guide\u003c\/a\u003e\u003ca class=\"btn ghost\" href=\"#contact_form_page\"\u003eConfirm Fitment\u003c\/a\u003e\n\u003c\/div\u003e\u003c\/section\u003e\n\u003c\/div\u003e","brand":"StopFlex","offers":[{"title":"Default Title","offer_id":48333573259523,"sku":"100334","price":5000.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0761\/8933\/5811\/files\/Product_Genuine_Alcon_RC6_6-Piston_Caliper_f63de8fd-67d3-4548-98aa-22d20a7f1662.png?v=1780914108","url":"https:\/\/stopflex-ccb.com\/products\/bmw-1-series-1m-coup-e82-alcon-rc6-380mm-ccb-kit","provider":"StopFlex","version":"1.0","type":"link"}