{"product_id":"audi-r8-42-coupe-and-spyder-carbon-ceramic-brake-kits","title":"2007-2015 Audi R8 (42) Carbon Ceramic Brake Kit","description":"\u003cdiv class=\"sfx\"\u003e\n\u003csection class=\"box red\"\u003e\u003ch2\u003e2007-2015 Audi R8 (42) Carbon Ceramic Brake Kit — OEM-Size Replacement\u003c\/h2\u003e\n\u003cp\u003eThe Type 42 Audi R8 owner usually shops carbon ceramic brakes for one of two reasons: the original iron rotors create heat, dust, and rotating mass on a mid-engine car that gets driven hard, or the factory ceramic discs need replacement without paying dealer-level parts pricing. This StopFlex OEM-size kit is built around the R8 front rotor references used on this chassis—365 mm iron and 380 mm CCB—with 356 mm rear rotors, matched pads, hats, and floating hardware for the listed brake configuration. The payoff is lower unsprung weight, cleaner open wheels, and repeated high-temperature braking without changing the car’s basic OEM caliper layout.\u003c\/p\u003e\n\u003cul class=\"check\"\u003e\n\u003cli\u003e\u003cspan\u003eBuilt for 2007-2015 Audi R8 Type 42 applications using the page-listed 365 mm front iron setup or 380 mm front factory-CCB setup with 356 mm rear rotors.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eIncludes carbon-ceramic rotors, matching pads, aluminum hats, and floating hardware rather than rotor rings alone, so the assembly is ordered as a complete brake package.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eTargets the Type 42 R8 use case: high-speed road and track braking where iron rotor heat, brake dust, and front-axle rotating mass are common owner complaints.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/section\u003e\u003csection class=\"box red\"\u003e\u003ch2\u003eFitment Hard Lines\u003c\/h2\u003e\n\u003cdiv class=\"scroll\"\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth class=\"accent\"\u003eField\u003c\/th\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003eAudi R8 (42)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel years\u003c\/td\u003e\n\u003ctd\u003e2007-2015\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFront rotor reference\u003c\/td\u003e\n\u003ctd\u003eR8: 365mm, 380mm (CCB)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRear rotor reference\u003c\/td\u003e\n\u003ctd\u003eR8: 356mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePage type\u003c\/td\u003e\n\u003ctd\u003eOEM-size carbon ceramic replacement\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum wheel size\u003c\/td\u003e\n\u003ctd\u003e19\" (for the 365 mm rotor)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cdiv class=\"sf-emph\"\u003e\u003cp\u003eFor OEM replacement orders, StopFlex builds around the factory rotor specification shown for this vehicle. Front floating-caliper setups require manual review before production. If the car uses aftermarket calipers such as Brembo, AP Racing, Alcon, or Wilwood, the order can still be built, but the exact caliper model, pad shape, and rotor dimensions must be confirmed before production.\u003c\/p\u003e\u003c\/div\u003e\n\u003cp\u003eThis setup uses a 365 mm rotor, so the minimum wheel size is 19\". Wheels under 19\" will not clear the caliper and rotor, and spoke profile and offset affect clearance too — confirm your exact wheels before ordering.\u003c\/p\u003e\u003c\/section\u003e\u003csection class=\"box\"\u003e\u003ch2\u003eWhy StopFlex CCB\u003c\/h2\u003e\n\u003cdiv class=\"grid g3\"\u003e\n\u003cdiv class=\"card\"\u003e\n\u003ch3\u003eLower Unsprung Mass\u003c\/h3\u003e\n\u003cp\u003eStopFlex carbon-ceramic rotors are engineered to reduce rotor mass versus comparable iron discs, helping the suspension react cleaner and the steering feel more precise.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"card\"\u003e\n\u003ch3\u003eHigh-Temperature Stability\u003c\/h3\u003e\n\u003cp\u003eThe carbon-silicon-carbide matrix is built for stable braking behavior at temperatures that can push iron rotors into heavy fade.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"card\"\u003e\n\u003ch3\u003eRust-Free Rotor Surface\u003c\/h3\u003e\n\u003cp\u003eCarbon ceramic does not form orange flash rust after rain, washing, or storage, keeping the visible rotor face cleaner behind open wheels.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"card\"\u003e\n\u003ch3\u003eLong Street-Service Potential\u003c\/h3\u003e\n\u003cp\u003eIn normal road use with matched pads and proper bedding, StopFlex CCB rotors are designed for far longer service life than typical iron replacement rotors.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"card\"\u003e\n\u003ch3\u003eLow Visible Dust\u003c\/h3\u003e\n\u003cp\u003eWhen paired with matched StopFlex pads, the system produces very low visible brake dust compared with conventional iron rotor and pad combinations.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"card\"\u003e\n\u003ch3\u003ePremium Ceramic-Glaze Appearance\u003c\/h3\u003e\n\u003cp\u003eStopFlex's proprietary coating creates a bright, high-end ceramic-glaze finish with subtle glaze texture and a more premium visual character behind open wheels.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"card\"\u003e\n\u003ch3\u003eStreet-Usable Cold Bite\u003c\/h3\u003e\n\u003cp\u003eStreet Spec and Track-Day Spec rotors are designed for normal first-stop road use, including cold-weather operation. Motorsport Spec is the competition-focused exception.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"card\"\u003e\n\u003ch3\u003eContinuous Fiber Reinforcement\u003c\/h3\u003e\n\u003cp\u003eLong-fiber carbon ceramic construction improves structural strength and thermal durability versus chopped-fiber approaches.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"card\"\u003e\n\u003ch3\u003eCustom Rotor Hat Color\u003c\/h3\u003e\n\u003cp\u003eEvery StopFlex OEM replacement order can be built with a custom rotor hat color, giving the carbon ceramic rotor package a cleaner match with the wheel, body color, and overall build style.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003c\/section\u003e\u003csection class=\"box\"\u003e\u003ch2\u003eHeat Management Note\u003c\/h2\u003e\n\u003cp\u003eCarbon ceramic rotors tolerate extreme surface temperature, but they do not remove every heat-management requirement. During repeated hard stops, heat can still soak into pads, fluid, seals, calipers, wheels, and nearby components. For long track sessions, mountain descents, or sustained aggressive driving, brake cooling and high-temperature fluid are still recommended.\u003c\/p\u003e\u003c\/section\u003e\u003csection class=\"box\"\u003e\u003ch2\u003eStreet \/ Track-Day \/ Motorsport Rotor Options\u003c\/h2\u003e\n\u003cdiv class=\"grid g3\"\u003e\n\u003cdiv class=\"card\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/8933\/5811\/files\/StopFlex_Street_CCB_Rotor.jpg?v=1773907551\" alt=\"StopFlex Street Spec carbon ceramic brake rotor\"\u003e\u003ch3\u003eStreet Spec\u003c\/h3\u003e\n\u003cp\u003eCeramic coating, cross-drilled face, and large cooling channels.\u003c\/p\u003e\n\u003cp\u003eBest for daily driving and premium street builds that need clean cold bite, low dust, corrosion-free appearance, and long service life.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"card\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/8933\/5811\/files\/StopFlex_Trackday_CCB_Rotor.jpg?v=1773907551\" alt=\"StopFlex Track-Day Spec carbon ceramic brake rotor\"\u003e\u003ch3\u003eTrack-Day Spec\u003c\/h3\u003e\n\u003cp\u003eCeramic coating, blank face, and honeycomb cooling channels.\u003c\/p\u003e\n\u003cp\u003eBest for fast-road and track-day use where repeated braking stability matters more than maximum visual drilling style.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"card\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/8933\/5811\/files\/StopFlex_Racing_CCB_Rotor.jpg?v=1773907551\" alt=\"StopFlex Motorsport Spec carbon ceramic brake rotor\"\u003e\u003ch3\u003eMotorsport Spec\u003c\/h3\u003e\n\u003cp\u003eUncoated blank face with honeycomb cooling channels.\u003c\/p\u003e\n\u003cp\u003eBest for race-focused builds that run competition pads, high-temperature fluid, cooling strategy, and a proper warm-up window. Not the default street choice.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003c\/section\u003e\u003csection class=\"box\"\u003e\u003ch2\u003ePackage Scope\u003c\/h2\u003e\n\u003cdiv class=\"scroll\"\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth class=\"accent\"\u003eItem\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCCB rotors\u003c\/td\u003e\n\u003ctd\u003eFull-car set by default\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCCB brake pads\u003c\/td\u003e\n\u003ctd\u003eMatched for StopFlex carbon ceramic rotors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e7075 aluminum floating rotor hats\u003c\/td\u003e\n\u003ctd\u003eVehicle-specific fitment\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStainless floating hardware\u003c\/td\u003e\n\u003ctd\u003eFull-car hardware set\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRotor hat color\u003c\/td\u003e\n\u003ctd\u003eCustom rotor hat colors are available for every OEM replacement order.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrder scope\u003c\/td\u003e\n\u003ctd\u003eDefault listing is full-car set. Front-only or rear-only orders can be arranged after confirmation.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003c\/section\u003e\u003csection class=\"box\"\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cdiv class=\"faq\"\u003e\n\u003cdetails\u003e\u003csummary\u003eWill this fit every 2007-2015 Audi R8?\u003c\/summary\u003e\u003cdiv class=\"a\"\u003e\u003cp\u003eNo. Fitment is limited to the exact Type 42 trims and brake sizes listed for this page. Before ordering, confirm whether your car has the 365 mm front iron setup or the 380 mm front carbon-ceramic setup, and verify the 356 mm rear rotor reference.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eDoes the kit keep the factory parking brake function?\u003c\/summary\u003e\u003cdiv class=\"a\"\u003e\u003cp\u003eYes, this OEM-replacement package is designed around the original rear brake layout for the compatible R8 Type 42 applications. Confirm your VIN and rear brake configuration before ordering so the 356 mm rear rotor and parking-brake interface are matched correctly.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhy switch from the OEM iron brakes to carbon ceramic on a Type 42 R8?\u003c\/summary\u003e\u003cdiv class=\"a\"\u003e\u003cp\u003eCarbon ceramic rotors reduce rotating and unsprung mass compared with iron, produce far less visible dust on the R8’s open wheels, and maintain braking consistency at higher temperatures. The kit keeps the car in the OEM-size brake family instead of converting it to an unrelated big-brake layout.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat should I confirm before placing the order?\u003c\/summary\u003e\u003cdiv class=\"a\"\u003e\u003cp\u003eConfirm model year, coupe or Spyder body, V8 or V10 trim, current front rotor diameter, rear rotor diameter, caliper type, wheel clearance, and whether the car originally had iron or factory CCB brakes. Compatibility is based on those brake details, not just the 2007-2015 R8 nameplate.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\n\u003c\/div\u003e\u003c\/section\u003e\u003csection class=\"cta\" id=\"contact_form_page\"\u003e\u003ch2\u003eNeed Fitment Confirmation?\u003c\/h2\u003e\n\u003cp\u003eSend the exact vehicle details, current rotor sizes, and caliper type before ordering.\u003c\/p\u003e\n\u003cdiv class=\"cta-row\"\u003e\n\u003ca class=\"btn\" href=\"\/pages\/carbon-ceramic-brakes\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eCarbon Ceramic Brakes: Buying \u0026amp; Fitment Guide\u003c\/a\u003e\u003ca class=\"btn ghost\" href=\"#contact_form_page\"\u003eConfirm Fitment\u003c\/a\u003e\n\u003c\/div\u003e\u003c\/section\u003e\n\u003c\/div\u003e","brand":"StopFlex","offers":[{"title":"Default Title","offer_id":47895400841475,"sku":"100008","price":3000.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0761\/8933\/5811\/files\/Audi-R8-42-CCB-Brake_63e6545d-79a4-4427-825c-1852d321a8b0.jpg?v=1776240630","url":"https:\/\/stopflex-ccb.com\/products\/audi-r8-42-coupe-and-spyder-carbon-ceramic-brake-kits","provider":"StopFlex","version":"1.0","type":"link"}